Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 GMC Sierra 1500 HD car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 GMC Sierra 1500 HD automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 GMC Sierra 1500 HD
- 2006 GMC Sierra 1500 HD SLE 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2006 GMC Sierra 1500 HD SLT 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
BRAKE SERVICE PROCEDURES FOR 2006 GMC Sierra 1500 HD AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Sierra 1500 HD cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Hydraulic Control Valves -> Master Cylinder
Vehicle: 2006 GMC Sierra 1500 HD SLE 6.0 V8 GAS
Master Cylinder
Some vehicles use a conventional tandem master cylinder with two hydraulic pistons operating in-line. The primary piston controls the front brake system and the secondary piston controls the rear brake system.
Other models use a master cylinder that operates the same as the conventional master cylinder, but also incorporates a quick take-up feature in the rear chamber to reduce excessive pedal travel which may result from increased fluid displacement required to move the low drag caliper piston out against the rotor.
The quick take-up uses a spring-loaded ball check val...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Sierra 1500 HD BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Sierra 1500 HD AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Sierra 1500 HD cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Brake Pad Service
Vehicle: 2006 GMC Sierra 1500 HD SLE 6.0 V8 GAS
The procedures to remove and install the brake pads are outlined in "Calip... "
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Sierra 1500 HD BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Sierra 1500 HD AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Sierra 1500 HD cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Aztek, Rendezvous & Vue -> Canyon, Colorado, Sierra & Silverado -> Equinox & Torrent -> Express & Savana -> HHR -> Installation -> Montana, Silhouette, Trans Sport & Venture -> Removal -> Tracker
Vehicle: 2006 GMC Sierra 1500 HD SLE 6.0 V8 GAS
Aztek, Rendezvous & Vue
Removal
- Raise and support vehicle.
- Mark relationship of drum to hub.
- Remove and discard retaining clip.
- Remove brake drum. If brake drum does not come off easily, proceed as follows:
- Loosen parking brake cable.
- Remove backing plate access hole plug.
- Disengage self adjuster by inserting suitable flat-bladed tool through backing plate access hole.
- Loosen adjuster screw by inserting another flat-bladed tool through access hole .
- Install access hole plug.
- Apply small amount of penetrating oil around brake drum center hole.
- Remove brake drum.
- Disengage adjuster spring hook e...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Sierra 1500 HD BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Sierra 1500 HD AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Sierra 1500 HD cars and light trucks from 1990+.
Anti-Lock Brakes -> Kelsey-Hayes -> System Service -> Brake Pressure Modulator Valve (BPMV) -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Front Wheel Speed Sensor -> Manual Bleed -> Pressure Bleed
Vehicle: 2006 GMC Sierra 1500 HD SLE 6.0 V8 GAS
Brake System Bleed
Gravity and vacuum bleeding procedures are not recommended for use with the anti-lock brake system. The manual bleed procedure is the preferred method, although pressure bleeding is also possible. Do not pump the brake pedal during the bleeding process, as fluid aeration may occur.
Manual Bleed
- Raise and support vehicle, then connect a clear plastic tube to brake bleed screw at righthand rear wheel.
- Place free end of tube in a glass jar partially filled with clean brake fluid. Ensure end of tube remains submerged in fluid and master cylinder reservoir is kept full.
- ...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Sierra 1500 HD BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Sierra 1500 HD AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Sierra 1500 HD cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Troubleshooting -> Brakes Grab -> Hard Pedal -> Slow Or No Release
Vehicle: 2006 GMC Sierra 1500 HD SLT 6.0 V8 GAS
Hard Pedal
- Internal vacuum leak.
- Faulty control valve.
- Broken or damaged hydraulic brake lines.
- Collapsed or damaged vacuum hose.
- Plugged or loose vacuum fitting.
- Bad stud welds on front or rear housing on power head.
- Faulty booster diaphragm.
- Restricted air filter element.
- Worn or distorted reaction plate or levers.
- Cracked or broken pow...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Sierra 1500 HD BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 GMC Sierra 1500 HD AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 GMC Sierra 1500 HD cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Troubleshooting -> Brakes Grab -> Hard Pedal -> Slow Or No Release
Vehicle: 2006 GMC Sierra 1500 HD SLE 6.0 V8 GAS
Hard Pedal
- Internal vacuum leak.
- Faulty control valve.
- Broken or damaged hydraulic brake lines.
- Collapsed or damaged vacuum hose.
- Plugged or loose vacuum fitting.
- Bad stud welds on front or rear housing on power head.
- Faulty booster diaphragm.
- Restricted air filter element.
- Worn or distorted reaction plate or levers.
- Cracked or broken pow...
CLICK HERE TO GET FULL ACCESS TO 2006 GMC Sierra 1500 HD BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 GMC Sierra 1500 HD vehicle.
|
| Access the Complete guide! |
