Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Mitsubishi Lancer car and truck
repair procedures including Mitsubishi engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Mitsubishi Lancer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Mitsubishi Lancer
- 2006 Mitsubishi Lancer Evolution 2.0 L4 GAS, CC:1997, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
- 2006 Mitsubishi Lancer Evolution MR 2.0 L4 GAS, CC:1997, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
- 2006 Mitsubishi Lancer Evolution RS 2.0 L4 GAS, CC:1997, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
- 2006 Mitsubishi Lancer OZ Rally 2.0 L4 GAS, CC:1999, Fuel Injection, Engine VIN:, Desg:E
- 2006 Mitsubishi Lancer ES 2.0 L4 GAS, CC:1999, Fuel Injection, Engine VIN:, Desg:E
- 2006 Mitsubishi Lancer Ralliart 2.4 L4 GAS, CC:2378, Fuel Injection, Engine VIN:, Desg:F
- 2006 Mitsubishi Lancer Evolution SE 2.0 L4 GAS, CC:1997, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
- 2006 Mitsubishi Lancer SE 2.0 L4 GAS, CC:1999, Fuel Injection, Engine VIN:, Desg:E
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mitsubishi Lancer AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mitsubishi Lancer cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Mitsubishi Lancer Ralliart 2.4 L4 GAS
- Disconnect battery ground cable.
- Remove retainer securing air cleaner duct then pull up on duct to remove.
- Remove bolts from exhaust manifold heat shield then remove shield.
- Raise vehicle on suitable lift.
- Remove bolts securing starter cover then remove cover.
- Remove bolt securing starter cover bracket then remove bracket.
- Remove nut from starter cable B+ terminal and disconnect wire connector from solenoid S-terminal.
- On models equipped with manual transaxle, remove bolts securing starter moto...
CLICK HERE TO GET FULL ACCESS TO 2006 Mitsubishi Lancer STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mitsubishi Lancer AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mitsubishi Lancer cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Mitsubishi Lancer Evolution 2.0 L4 GAS
- Disconnect battery cables.
- Remove retainer securing air duct then remove duct.
- Remove nut from starter cable B+ terminal and disconnect wire connector from solenoid S-terminal.
- Remove bolts securing starter motor, gr...
CLICK HERE TO GET FULL ACCESS TO 2006 Mitsubishi Lancer STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mitsubishi Lancer AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mitsubishi Lancer cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Mitsubishi Lancer Evolution MR 2.0 L4 GAS
- Disconnect battery ground cable.
- Loosen nut from alternator lower alternator mounting bolt.
- Loosen upper alternator lock bolt.
- Remove power steering pump hose clamp mounting bolts.
- Remove bolts securing engine mounting insulator.
- Tilt engine forward with a suitable tool.
- Remove bolts securing alternator adjusting brace then remove brace.
- Remove terminal nut and alternator electrical connector from back of alternator.
- On models equipped with ABS, remove jam nuts from engine mounting insulator.
- On all models, loosen alternator drive belt lock-bolt.
- Loosen alternator adjusting bolt.
- Remov...
CLICK HERE TO GET FULL ACCESS TO 2006 Mitsubishi Lancer STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mitsubishi Lancer AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mitsubishi Lancer cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Mitsubishi Lancer Evolution SE 2.0 L4 GAS
- Disconnect battery cables.
- Remove retainer securing air duct then remove duct.
- Remove nut from starter cable B+ terminal and disconnect wire connector from solenoid S-terminal.
- Remove bolts securing starter motor, gr...
CLICK HERE TO GET FULL ACCESS TO 2006 Mitsubishi Lancer STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mitsubishi Lancer AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mitsubishi Lancer cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Mitsubishi Lancer Evolution 2.0 L4 GAS
- Disconnect battery ground cable.
- Loosen nut from alternator lower alternator mounting bolt.
- Loosen upper alternator lock bolt.
- Remove power steering pump hose clamp mounting bolts.
- Remove bolts securing engine mounting insulator.
- Tilt engine forward with a suitable tool.
- Remove bolts securing alternator adjusting brace then remove brace.
- Remove terminal nut and alternator electrical connector from back of alternator.
- On models equipped with ABS, remove jam nuts from engine mounting insulator.
- On all models, loosen alternator drive belt lock-bolt.
- Loosen alternator adjusting bolt.
- Remov...
CLICK HERE TO GET FULL ACCESS TO 2006 Mitsubishi Lancer STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mitsubishi Lancer AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mitsubishi Lancer cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Mitsubishi Lancer SE 2.0 L4 GAS
- Disconnect battery ground cable.
- Loosen nut from alternator lower alternator mounting bolt.
- Loosen upper alternator lock bolt.
- Remove power steering pump hose clamp mounting bolts.
- Remove bolts securing engine mounting insulator.
- Tilt engine forward with a suitable tool.
- Remove bolts securing alternator adjusting brace then remove brace.
- Remove terminal nut and alternator electrical connector from back of alternator.
- On models equipped with ABS, remove jam nuts from engine mounting insulator.
- On all models, loosen alternator drive belt lock-bolt.
- Loosen alternator adjusting bolt.
- Remov...
CLICK HERE TO GET FULL ACCESS TO 2006 Mitsubishi Lancer STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Mitsubishi Lancer vehicle.
|
| Access the Complete guide! |
