Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2007 Chevrolet Silverado car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2007 Chevrolet Silverado automobile. Try the Automotix DIY solution today!
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Chevrolet Silverado AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Chevrolet Silverado cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2007 Chevrolet Silverado Classic SS 6.0 V8 GAS
Refer to Fig. for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2007 Chevrolet Silverado TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Chevrolet Silverado AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Chevrolet Silverado cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Aids -> Diagnostic Check -> Diagnostic Tests -> Intermittent & Poor Connections -> Intermittents -> Poor Connections -> Test Procedures
Vehicle: 2007 Chevrolet Silverado Classic SS 6.0 V8 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector) and follow manufacturer's instructions.
Diagnostic Tests
Test Procedures
Refer to Figs. through for diagnostic test procedures.
Diagnostic Check
- Check for aftermarket devices which could affect the operation of the TPMS to verify that none are installed.
- Check the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
- Ensure that the scan tool selected front and rear tire pressure parameters are correct compared to the tire...
CLICK HERE TO GET FULL ACCESS TO 2007 Chevrolet Silverado TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Chevrolet Silverado AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Chevrolet Silverado cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor (Clamp Style) -> Tire Pressure Indicator Sensor (Snap In Style)
Vehicle: 2007 Chevrolet Silverado Classic SS 6.0 V8 GAS
Tire Pressure Indicator Sensor (Clamp Style)
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bea...
CLICK HERE TO GET FULL ACCESS TO 2007 Chevrolet Silverado TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Chevrolet Silverado AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Chevrolet Silverado cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2007 Chevrolet Silverado Classic SS 6.0 V8 GAS
When the TPMS detects a significant loss of tire pressure, the CHECK TIRE PRESSURE message is displayed on the DI...
CLICK HERE TO GET FULL ACCESS TO 2007 Chevrolet Silverado TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Chevrolet Silverado AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Chevrolet Silverado cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2007 Chevrolet Silverado Classic SS 6.0 V8 GAS
- Place the ignition switch in the Accy position.
- Press the keyless entry transmitters lock and unlock buttons at the same time until a horn chirp sounds or use the scan tool and select Special Functions/Sensor Learn Mode Enable/Enable soft key. A horn chirp will sound indicating the mode has been enabled.
- The horn should chirp twice and the low tire pressure warning indicator should begin to flash indicating the system is in the learn mode.
- Using GM tool No. J-46079 or equivalent, starting with the left front tire, hold...
CLICK HERE TO GET FULL ACCESS TO 2007 Chevrolet Silverado TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Chevrolet Silverado AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2007 Chevrolet Silverado cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2007 Chevrolet Silverado Classic SS 6.0 V8 GAS
The TPM (Tire Pressure Monitor) System warns the driver when a significant loss, or gain of tire pressure occurs in any of the four tires and allows the driver to display the individual tire pressures and the locations on the DIC (Driver Information Center) display. The system uses the PCM (Powertrain Control Module), IPC (Instrument Panel Cluster), DIC, remote control door lock receiver, a radio frequency transmitting pressure sensor in each wheel assembly and the serial data circuit.
When the vehicle is stationary, the sensor is inactive. When the vehicle is operated and as the veh...
CLICK HERE TO GET FULL ACCESS TO 2007 Chevrolet Silverado TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2007 Chevrolet Silverado vehicle.
|
| Access the Complete guide! |
