Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2007 Dodge Magnum car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2007 Dodge Magnum automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2007 Dodge Magnum
- 2007 Dodge Magnum SE 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:V
- 2007 Dodge Magnum SE 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:T
- 2007 Dodge Magnum SXT 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:V
- 2007 Dodge Magnum R/T 5.7 V8 GAS, CID:345, Fuel Injection, Aspiration:345, Engine VIN:, Desg:2
- 2007 Dodge Magnum SRT8 6.1 V8 GAS, CC:6059, CID:370, Fuel Injection, Aspiration:370, Engine VIN:, Desg:3
BRAKE SERVICE PROCEDURES FOR 2007 Dodge Magnum AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Dodge Magnum cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Bench Bleeding -> Manual Bleed -> Master Cylinder Bleed -> On-Vehicle Bleeding -> Pressure Bleed
Vehicle: 2007 Dodge Magnum SE 3.5 V6 GAS
Pressure Bleed
Use bleeder tank tool No. C-3496-B, or equivalent, and adapter tool No. BB400-9A, or equivalent, to pressurize hydraulic system.
Normal pressure bleeder pressure should not be more than 35 psi. On models equipped with plastic reservoirs, do not exceed 25 psi bleeding pressure.
- Attach suitable clear plastic hose to bleeder screw and submerge other end into clear container with clean brake fluid.
- Open bleeder screw at least one full turn.
- Bleed 4-8 ounces of fluid through system until air free flow is maintained.
- Repeat procedure at all screws.
- If pedal travel is excess...
CLICK HERE TO GET FULL ACCESS TO 2007 Dodge Magnum BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Dodge Magnum AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Dodge Magnum cars and light trucks from 1990+.
Disc Brakes -> Charger, Magnum & 300 -> Rotor, Replace
Vehicle: 2007 Dodge Magnum SE 3.5 V6 GAS
- Raise and support vehicle, then remove tire and wheel assembly.
- Grasp rear of caliper and pull outward working with guide pins to retract piston. Never push on piston directly.
- Remove disc brak...
CLICK HERE TO GET FULL ACCESS TO 2007 Dodge Magnum BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Dodge Magnum AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Dodge Magnum cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service
Vehicle: 2007 Dodge Magnum SXT 3.5 V6 GAS
The only serviceable component on master cylinder(s) are the reservoir and seali...
CLICK HERE TO GET FULL ACCESS TO 2007 Dodge Magnum BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Dodge Magnum AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Dodge Magnum cars and light trucks from 1990+.
Disc Brakes -> Charger, Magnum & 300 -> Adjustments -> Parking Brake
Vehicle: 2007 Dodge Magnum SE 3.5 V6 GAS
Parking Brake
- Place parking brake lever in full released position.
- Raise and support vehicle.
- Remove plug in parking brake shoe support to access adjuster star-wheel.
- Through access hole, rotate adjuster star wheel to expand shoes outward against drum.
- Turn adjuster star wheel until wheel will not rotate using suit...
CLICK HERE TO GET FULL ACCESS TO 2007 Dodge Magnum BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Dodge Magnum AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Dodge Magnum cars and light trucks from 1990+.
Disc Brakes -> Charger, Magnum & 300 -> Caliper Service -> Assemble -> Disassemble -> Overhaul -> Replacement
Vehicle: 2007 Dodge Magnum SRT8 6.1 V8 GAS
Replacement
- Depress brake pedal past its first inch of travel and hold it in position using brake pedal holding tool.
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove banjo bolt connecting flexible brake hose to caliper.
- While holding guide pins from turning, remove caliper guide pin bolts.
- Remove brake caliper from brake adapter and pads.
- Reverse procedure to install, noting the following:
- Completely retract caliper piston back into bore of caliper using hand pressure or suitable C-clamp by first placing suitable wood block over piston.
- Do not crossthread caliper ...
CLICK HERE TO GET FULL ACCESS TO 2007 Dodge Magnum BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Dodge Magnum AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Dodge Magnum cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> Decreasing Brake Pedal Travel -> Dragging Brakes -> Hard Brake Pedal
Vehicle: 2007 Dodge Magnum R/T 5.7 V8 GAS
Decreasing Brake Pedal Travel
If a decreasing brake pedal is encountered, the power brake unit may be binding internally. To test the power brake unit for this condition proceed as follows:
- Place transmission shift lever into Neutral and start engine.
- Increase engine speed to approximately 1500 RPM, close throttle and completely depress brake pedal.
- Slowly release brake pedal and stop engine.
- Remove vacuum check valve and hose from power brake unit. Observe for backward movement of brake pedal.
- If brake pedal moves backward, power brake unit has internal binding. Replace power brake u...
CLICK HERE TO GET FULL ACCESS TO 2007 Dodge Magnum BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
