Auto Parts Search
We have info for following modifications of 2007 Hyundai Santa FE
- 2007 Hyundai Santa FE GLS 2.7 V6 GAS, CC:2656, Fuel Injection, Engine VIN:, Desg:D
- 2007 Hyundai Santa FE Limited 3.3 V6 GAS, CC:3342, Fuel Injection, Engine VIN:, Desg:E
- 2007 Hyundai Santa FE SE 3.3 V6 GAS, CC:3342, Fuel Injection, Engine VIN:, Desg:E
MAINTENANCE LAMP RESET PROCEDURES FOR 2007 Hyundai Santa FE AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2007 Hyundai Santa FE cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Air Bag (SRS) Service Reminder Lamp ->
Vehicle: 2007 Hyundai Santa FE SE 3.3 V6 GAS
The Supplemental Restraint System (SRS) or air bag warning lamp should light for approximately 6 seconds wh...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Santa FE MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2007 Hyundai Santa FE AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2007 Hyundai Santa FE cars and light trucks sold in the U.S. from 1990+.
Hyundai -> 4WD System Warning Lamp -> Santa Fe & Tucson
Vehicle: 2007 Hyundai Santa FE GLS 2.7 V6 GAS
This lamp should light for a few seconds when the ignition is turned On as a bulb check. If th...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Santa FE MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2007 Hyundai Santa FE AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2007 Hyundai Santa FE cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Check Engine/Malfunction Indicator Lamp (MIL) Lamp ->
Vehicle: 2007 Hyundai Santa FE SE 3.3 V6 GAS
The Check Engine/MIL lamp will be illuminated for approximately 5 seconds when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a diagnostic trouble code has been stored by the electronic control system. On models less OBD II, after diagnosis and repair are complete, place ignition switch in Off position, then clear diagnostic trouble codes by disconnecting the battery ground cable or the ECM connector for at least 15 seconds. On models equipped with OBD II, following diagnosis ...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Santa FE MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2007 Hyundai Santa FE AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2007 Hyundai Santa FE cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Electronic Brake Force Distribution (EBD)/Parking Brake Warning Lamp ->
Vehicle: 2007 Hyundai Santa FE GLS 2.7 V6 GAS
The EBD/Parking Brake warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The lamp will also illuminate when the parking brake is in the applied position. If the lamp EBD/Pa...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Santa FE MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2007 Hyundai Santa FE AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2007 Hyundai Santa FE cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Check Engine/Malfunction Indicator Lamp (MIL) Lamp ->
Vehicle: 2007 Hyundai Santa FE GLS 2.7 V6 GAS
The Check Engine/MIL lamp will be illuminated for approximately 5 seconds when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a diagnostic trouble code has been stored by the electronic control system. On models less OBD II, after diagnosis and repair are complete, place ignition switch in Off position, then clear diagnostic trouble codes by disconnecting the battery ground cable or the ECM connector for at least 15 seconds. On models equipped with OBD II, following diagnosis ...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Santa FE MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2007 Hyundai Santa FE AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2007 Hyundai Santa FE cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Electronic Stability Program (ESP) Warning Lamp ->
Vehicle: 2007 Hyundai Santa FE Limited 3.3 V6 GAS
The ESP warning lamp is used to warn of a system fault. It will be lit when the ignition switch is placed in the on position, but should go out when the self-diagnostic system determines that the system is functioning properly. ...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Santa FE MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2007 Hyundai Santa FE vehicle. |
Access the Complete guide! |