Auto Parts Search
2007 Porsche Boxster CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Porsche REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2007 Porsche Boxster car and truck
repair procedures including Porsche engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your Porsche Boxster automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Porsche Boxster AUTOMOBILES
CV AXLE SHAFT, Replace -> Left -> Right
Vehicle: 2007 Porsche Boxster 2.7 H6 GAS
Right
- Raise and support vehicle then remove wheel.
- Loosen and unscrew axle nut.
- Push suitable protection over drive shaft.
- Undo drive shaft on transmission.
- Undo stabilizer mount on stabilizer.
- Undo ball heads of toe control arm and axle strut on right side and counter with special tool 9546 (Torx) or equivalent.
- Press out both ball heads using special tool 9560 (press-off tool) or equivalent and a commercially available press-off tool. When positioning puller, ensure that boot of ball head is not damaged. If necessary, coat boot and press-off tool with tire mounting paste. If n...
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2007 Porsche Boxster AUTOMOBILES
Component Replacement -> Tire Pressure Sensor -> TPMS Antenna -> TPMS Control Module
Vehicle: 2007 Porsche Boxster 2.7 H6 GAS
Tire Pressure Sensor
Position the tire changer head approximately 15 cm behind the valve stem of the sensor for the top tire bead to prevent damage to the sensor.
Position the tire changer head approximately 5 cm behind the valve stem of the sensor for the lower tire bead to prevent damage to the sensor.
- Remove the tire using a suitable tire changer using care not to damage wheel or the tire pressure sensor.
- Remove the tire pressure sensor hex head retaining screw hex using a T20 bit, Fig. .
- Remove the tire pressure sensor valve stem retaining nut, then the sensor.
- Reverse proce...
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2007 Porsche Boxster AUTOMOBILES
Alternator, Replace
Vehicle: 2007 Porsche Boxster 2.7 H6 GAS
- Disconnect battery ground cable at battery.
- Remove righthand seat.
- Open rear wall cover behind seats.
- Disconnect B+ leads at starter and alternator.
- Remove drive belt.
- Remove righthand alternator mounting bolt.
- Remove lefthand alternator mounting bolt.
- Remove alternator from slotted bracket and remove mounting bolt with deflection roller.
- Alt...
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2007 Porsche Boxster AUTOMOBILES
Cabin Air Filter Service -> Porsche -> 2005-09 Boxster, Cayman & 911
Vehicle: 2007 Porsche Boxster 2.7 H6 GAS
On 2005-07 models, the cabin air filter should be replaced every 20,000 miles. The filter should be replaced more often if air flow is less than normal.
On 2008-09 models, the cabin air filter should be replaced every 36,000 miles. The filter should be replaced more often if air flow is less than normal.
- Open the luggage compartment lid.
- Remove the battery cover.
- Remove the right plenum chamber cover.
- Loosen the telephone antenna at the two top retaining screws and remove the two bottom retaining screws, then...
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2007 Porsche Boxster AUTOMOBILES
Porsche -> Anti-Lock Brake System (ABS)/Traction Control System (TCS) Indicator ->
Vehicle: 2007 Porsche Boxster S 3.4 H6 GAS
The Anti-Lock Brake/Traction Control System lamp will be illuminated when the ignition switch is in the on position with engine not running. When the engine is started, the lamp should go out. ...
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2007 Porsche Boxster AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2007 Porsche Boxster S 3.4 H6 GAS
Inlet
- Drain coolant into a suitable container.
- Reposition clamp at heater core and remove hose.
- Reposition clamp at hot air duct supply and remove hose.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2007 Porsche Boxster AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2007 Porsche Boxster S 3.4 H6 GAS
Do not remove drive belt when engine is warm! Risk of damage or deformation! Drive belts should only be removed when they have cooled down.
- Put protective covers in passenger compa...
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster SERPENTINE BELT SERVICE PROCEDURES
WIRING DIAGRAMS FOR 2007 Porsche Boxster AUTOMOBILES
OEM drawn wiring diagrams for most 2007 Porsche Boxster cars and light trucks sold in the U.S.
 2007 Porsche Boxster S 3.4 H6 GAS Wiring DiagramComponents on diagram: |
 2007 Porsche Boxster 2.7 H6 GAS Wiring DiagramComponents on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 2007 Porsche Boxster AUTOMOBILES
OEM TSB listings for most 2007 Porsche Boxster cars and light trucks sold in the U.S. from 1985+.
|
Document: WARRANTY ADMINISTRATION - CSO SURCHARGES NOT ALLOWED ON WARRANTY CLAIMS Vehicle: 2007 Porsche Boxster 2.7 H6 GAS Auto Systems: |
|
Document: OVERVIEW OF APPROVED ENGINE OILS - REVISED Vehicle: 2007 Porsche Boxster 2.7 H6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2007 Porsche Boxster AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2007 Porsche Boxster cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2007 Porsche Boxster cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2007 Porsche Boxster cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2007 Porsche Boxster cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2007 Porsche Boxster SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
| More parts |
