Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Cadillac SRX car and truck
repair procedures including Cadillac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Cadillac SRX automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Cadillac SRX
- 2008 Cadillac SRX 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:A
- 2008 Cadillac SRX 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Cadillac SRX 3.6 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove battery tray.
- Remove cowl panel retaining bolts.
- Remove cowl panel.
- Release clamp on heater inlet hose at heater core.
- Remove hose from heater core.
- Release clamp on heater inlet hose at thermostat assembly.
- Remove hose from thermostat assembly.
- Remove hose from vehicle.
- Reverse procedure to...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Cadillac SRX 3.6 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Remove air cleaner assembly.
- Reposition hose clamp from thermostat housing using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from thermostat housing.
- Disconnect radiator outlet hose from support bracket.
- Raise and support vehicle.
- Remove front air deflector retainers.
- Remove front air deflector.
- Remove ECM mounting nuts and reposition ECM aside.
- Reposi...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Cadillac SRX 4.6 V8 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove battery tray.
- Remove cowl panel retaining bolts.
- Remove cowl panel.
- Release clamp on heater inlet hose at heater core.
- Remove hose from heater core.
- Release clamp on heater inlet hose at thermostat assembly.
- Remove hose from thermostat assembly.
- Remove hose from vehicle.
- Reverse procedure to...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Cadillac SRX 3.6 V6 GAS
- Drain engine coolant into suitable container.
- Remove Positive Crankcase Ventilation (PCV) hose from air cleaner duct resonator.
- Loosen clamps and remove air cleaner duct.
- Disconnect cooling fan electrical connectors and shroud condenser tube retainer clip.
- Disengage surge tank inlet hose from shroud retaining and position hose aside.
- Remove mounting bolts and cooling fan assembly.
- Remove condenser seal, radiator mounting bolts, then the support brackets.
- Raise and support vehicle.
- Remove lower and upper m...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Cadillac SRX 4.6 V8 GAS
- Drain engine coolant into suitable container.
- Remove auxiliary cooling fan to condenser upper mounting bolts.
- Remove retainers and front air deflector.
- Disconnect cooling fan electrical connectors.
- Remove lower mounting bolts and cooling fan.
- Remove water pump drive belt.
- Remove upper ...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Cadillac SRX AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Cadillac SRX cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Cadillac SRX 4.6 V8 GAS
Lower
- Drain cooling system into a suitable container.
- Remove radiator inlet hose.
- Reposition hose clamp from thermostat housing using hose clamp pliers J 38185 or equivalent.
- Remove radiator outlet hose from thermostat housing.
- Disconnect radiator outlet hose from support bracket.
- Remove air cleaner intake duct.
- Reposition hose clamp from radiator using hose clamp plier...
CLICK HERE TO GET FULL ACCESS TO 2008 Cadillac SRX RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
