Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Chevrolet Cobalt car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Chevrolet Cobalt automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Chevrolet Cobalt
- 2008 Chevrolet Cobalt SS 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:X
- 2008 Chevrolet Cobalt LS 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
- 2008 Chevrolet Cobalt LT 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
- 2008 Chevrolet Cobalt Sport 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:B
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet Cobalt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet Cobalt cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Aura, DTS, G6, G8, Lucerne, Malibu, Solstice & Sky -> Aveo -> Corvette -> CTS -> Disassemble -> Grand Prix & Impala -> LaCrosse, STS & XLR -> Master Cylinder Overhaul -> Vibe -> Wheel Cylinder Overhaul
Vehicle: 2008 Chevrolet Cobalt Sport 2.4 L4 GAS
Master Cylinder Overhaul
Grand Prix & Impala
Disassemble
Refer to Figs. and , when performing the following procedures.
- Disconnect and plug hydraulic lines.
- Remove mounting nuts and master cylinder.
- Remove reservoir cover and diaphragm. Discard old brake fluid.
- Inspect cover and diaphragm.
- Remove fluid level switch.
- On models equipped with compact master cylinder,remove proportioning valve, Fig. .
- On all models, depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet nearest to cowl when master cylinder is installed), then remove primary and secondary pistons by a...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Cobalt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet Cobalt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet Cobalt cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service
Vehicle: 2008 Chevrolet Cobalt LT 2.2 L4 GAS
Hydro-boost brake boosters are...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Cobalt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet Cobalt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet Cobalt cars and light trucks from 1990+.
Disc Brakes -> GM Single Piston -> Tightening Specifications
Vehicle: 2008 Chevrolet Cobalt LT 2.2 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Cobalt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet Cobalt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet Cobalt cars and light trucks from 1990+.
Disc Brakes -> GM Single Piston -> Rotor Replace -> AURA, Cobalt, G5 & Malibu -> Solstice & SKY
Vehicle: 2008 Chevrolet Cobalt SS 2.0 L4 GAS
AURA, Cobalt, G5 & Malibu
- Raise and support vehicle, then remove tire and wheel assembly.
- Compress piston into caliper bore using suitable C-clamp to allow caliper pivot upward from brake pads.
- Install and tighten two wheel nuts opposite to retain rotor to hub.
- Remove guide pin bolts, caliper and bracket.
- Mark rotor to wheel studs for installation alignment and re...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Cobalt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet Cobalt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet Cobalt cars and light trucks from 1990+.
Anti-Lock Brakes -> Teves MK-70 -> System Service -> Bleed Sequence -> Brake Pressure Modulator (BPMV) -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Wheel Speed Sensors
Vehicle: 2008 Chevrolet Cobalt LT 2.2 L4 GAS
Brake System Bleed
The Auto Bleed Procedure may be terminated at any time during the process by pressing the EXIT button. No further Scan Tool prompts pertaining to the Auto Bleed procedure will be given. After exiting the bleed procedure, relieve bleed pressure and disconnect bleed equipment per manufacturers instructions. Failure to properly relieve pressure may result in spilled brake fluid.
- Raise and support vehicle, then remove all four tire and wheel assemblies.
- Inspect brake system for leaks and visual damage.
- Lower vehicle and inspect battery charge.
- Connect a suitably program...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Cobalt BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet Cobalt AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet Cobalt cars and light trucks from 1990+.
Hydraulic Brake Systems -> Troubleshooting -> Master Cylinder Internal Fluid Leakage Check -> Road Test
Vehicle: 2008 Chevrolet Cobalt LT 2.2 L4 GAS
When troubleshooting the hydraulic brake system, perform the following inspections.
Master Cylinder Internal Fluid Leakage Check
Start engine and depress the brake pedal. If the pedal gradually falls under constant pressure, the hydraulic system may be leaking. Raise the vehicle on a lift and inspect all tubing lines and backing plates for signs of leakage. It may be required to lift or remove the carpeting or floor mats to inspect for boost...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Cobalt BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
