Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Chevrolet Express 2500 car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Chevrolet Express 2500 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Chevrolet Express 2500
- 2008 Chevrolet Express 2500 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2008 Chevrolet Express 2500 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:C
- 2008 Chevrolet Express 2500 6.6 V8 DIESEL, CID:400, Fuel Injection, Aspiration:400, Engine VIN:, Desg:6
- 2008 Chevrolet Express 2500 LT 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:K
- 2008 Chevrolet Express 2500 LS 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:K
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Express 2500 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Express 2500 cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2008 Chevrolet Express 2500 LT 6.0 V8 GAS
Tire Pressure Indicator Sensor
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over ...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Express 2500 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Express 2500 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Express 2500 cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2008 Chevrolet Express 2500 6.6 V8 DIESEL
Tire Pressure Indicator Sensor
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over ...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Express 2500 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Express 2500 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Express 2500 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Keyless Entry Transmitter Or DIC Method -> Scan Tool Method
Vehicle: 2008 Chevrolet Express 2500 6.0 V8 GAS
Keyless Entry Transmitter Or DIC Method
- On models with standard ignition switch, place the ignition switch in the On position.
- On models with keyless ignition switch, place the ignition switch in the Accy position.
- On all models, using the keyless entry transmitters press the lock and unlock buttons at the same time until a horn chirp sounds indicating the learn mode has been actuated. The left front turn signal will also be illuminated.
- Using the DIC (Driver Information Center) press and release the Info button until the Tire Learn message is indicated on the DIC display. Depres...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Express 2500 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Express 2500 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Express 2500 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Keyless Entry Transmitter Or DIC Method -> Scan Tool Method
Vehicle: 2008 Chevrolet Express 2500 LS 6.0 V8 GAS
Keyless Entry Transmitter Or DIC Method
- On models with standard ignition switch, place the ignition switch in the On position.
- On models with keyless ignition switch, place the ignition switch in the Accy position.
- On all models, using the keyless entry transmitters press the lock and unlock buttons at the same time until a horn chirp sounds indicating the learn mode has been actuated. The left front turn signal will also be illuminated.
- Using the DIC (Driver Information Center) press and release the Info button until the Tire Learn message is indicated on the DIC display. Depres...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Express 2500 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Express 2500 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Express 2500 cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2008 Chevrolet Express 2500 4.8 V8 GAS
The TPMS (Tire Pressure Monitor System) warns the driver when a significant loss, or gain of tire pressure occurs in any of the four tires and allows the driver to display the individual tire pressures and the locations on the DIC (Driver Information Center) display. The system consists of the BCM (Body Control Module), DIC, instrument cluster, RCDLR (Remote Control Door Lock Receiver), RF (Radio Frequency transmitting tire pressure sensor in each wheel and serial data circuit. Each tire pressure sensor has an internal power supply with a service life of 10 years.
When the vehicle is...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Express 2500 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Express 2500 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Express 2500 cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2008 Chevrolet Express 2500 6.6 V8 DIESEL
The TPMS (Tire Pressure Monitor System) warns the driver when a significant loss, or gain of tire pressure occurs in any of the four tires and allows the driver to display the individual tire pressures and the locations on the DIC (Driver Information Center) display. The system consists of the BCM (Body Control Module), DIC, instrument cluster, RCDLR (Remote Control Door Lock Receiver), RF (Radio Frequency transmitting tire pressure sensor in each wheel and serial data circuit. Each tire pressure sensor has an internal power supply with a service life of 10 years.
When the vehicle is...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Express 2500 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Chevrolet Express 2500 vehicle.
|
| Access the Complete guide! |
