Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Chevrolet HHR car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Chevrolet HHR automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Chevrolet HHR
- 2008 Chevrolet HHR LT 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:B
- 2008 Chevrolet HHR LT 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:D
- 2008 Chevrolet HHR LS 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:D
- 2008 Chevrolet HHR LT Panel 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:B
- 2008 Chevrolet HHR LT Panel 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:D
- 2008 Chevrolet HHR LS Panel 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:D
- 2008 Chevrolet HHR SS 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:X
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet HHR AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet HHR cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> General Service
Vehicle: 2008 Chevrolet HHR LS 2.2 L4 GAS
Certain general service procedures apply, regardless of whether the brakes are vacuum or hydraulically assisted. Only top quality, clean brake fluid should be used. More seals and valves are used with power brake systems than with ordinary brakes, so an inferior brake fluid will do much more damage. For the same reason, ensure all dirt is kept out of the system. Additionally, on models with hydraulic assist brakes, care must be taken not to mix the fluids of the booster hydraulic system and brake hydraulic system as the fluids are not compatible.
If the power unit fails, the brak...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet HHR BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet HHR AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet HHR cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Rotor, Replace -> 2WD Models -> 4WD Models -> Front -> Rear
Vehicle: 2008 Chevrolet HHR LS 2.2 L4 GAS
2WD Models
Front
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Remove caliper as outlined in .
- Remove grease cap from hub/rotor, Fig. .
- Remove cotter pin, nut and washer.
- Remove hub/rotor from spindle, being careful not to damage spindle threads or outer bearing.
- Reverse procedure to install, noting the following:
- Apply high-temperature wheel bearing grease to inner and outer wheel bearings.
- Torque nut to 12 ft. lbs., while turning wheel assembly forward by hand, back nut off one flat or until hole i...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet HHR BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet HHR AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet HHR cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Power Brake Unit Service
Vehicle: 2008 Chevrolet HHR LT 2.2 L4 GAS
The power brake unit is n...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet HHR BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet HHR AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet HHR cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Brake Pad Service -> Installation -> Removal
Vehicle: 2008 Chevrolet HHR LT Panel 2.4 L4 GAS
Removal
- Remove caliper as outlined in .
- Remove inboard pad with retainer spring.
- Remove outboard pad and position caliper on front suspension so brake hose will not support weight of caliper.
- Remove two sleeves from inboard ears of caliper.
- Remove four rubber bushings from grooves in each of caliper ears.
Installation
- Lubricate new sleeves, rubber bushings, bushing grooves and mounting bolt ends with lubricant part No. 19010909, or equivalent.
- Install new bushings and sleeves in caliper e...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet HHR BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet HHR AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet HHR cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Caliper Service -> Assemble -> Disassemble -> Front -> Inspection -> Installation -> Rear -> Removal
Vehicle: 2008 Chevrolet HHR LT Panel 2.4 L4 GAS
Removal
Front
- Siphon brake fluid out of master cylinder until fluid level is approximately 1/3 full, this will prevent fluid overflow when caliper piston is pushed back into its bore.
- Raise and support vehicle, then remove wheels.
- Push piston back into its bore using suitable C-clamp, Fig. .
- Remove brake caliper hose bolt, then two metal gaskets from brake caliper bolt.
- Remove two caliper mounting bolts and lift caliper off of rotor.
Rear
- Siphon brake fluid out of master cylinder until fluid level is approximately 1/3 full, this will prevent fluid overflow when caliper piston is pushed ...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet HHR BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Chevrolet HHR AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Chevrolet HHR cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Description -> Operation -> Single Diaphragm Type -> Tandem (Dual) Diaphragm Type
Vehicle: 2008 Chevrolet HHR LT 2.2 L4 GAS
In order to properly service power brake systems, a thorough understanding of the various power assist systems is required. These systems provide a mechanical assist, acting to increase the force applied to the master cylinder piston by the driver while decreasing the effort required to obtain acceptable stopping performance. Two basic types of power assist mechanisms are used: vacuum assist diaphragm assemblies which use engine vacuum and in some cases vacuum from an external vacuum pump, and hydraulic assist assemblies which use hydraulic pressure developed by an external pump (us...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet HHR BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Chevrolet HHR vehicle.
|
| Access the Complete guide! |
