Auto Parts Search
We have info for following modifications of 2008 Ford Escape
- 2008 Ford Escape Hybrid 2.3 L4 ELECTRIC/GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:H
- 2008 Ford Escape XLT 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2008 Ford Escape XLT 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
- 2008 Ford Escape XLS 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2008 Ford Escape Limited 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Ford Escape AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Ford Escape cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2008 Ford Escape Limited 3.0 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at coolant adapter assembly.
- Remove hose from coolant adapter assembly.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Drain cooling system into a suitable container.
- Reposition heater hose outlet clamp at heater core.
- Disconnect heater outlet hose fr...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Escape RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Ford Escape AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Ford Escape cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2008 Ford Escape XLT 3.0 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at coolant adapter assembly.
- Remove hose from coolant adapter assembly.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Drain cooling system into a suitable container.
- Reposition heater hose outlet clamp at heater core.
- Disconnect heater outlet hose fr...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Escape RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Ford Escape AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Ford Escape cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Ford Escape XLT 2.3 L4 GAS
- Drain engine cooling system into a suitable container.
- Recover A/C refrigerant.
- Match mark hood latch position prior to removal of bolts.
- Loosen hood latch nut, then remove hood latch bolts and position hood latch aside.
- Detach wiring harness pin-type retainers, then remove radiator support bracket bolt.
- Remove front impact severity sensor bolt.
- Disconnect electrical connector and remove front impact severity sensor.
- Remove pushpin r...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Escape RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Ford Escape AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Ford Escape cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Ford Escape Limited 3.0 V6 GAS
- Raise and support vehicle.
- Drain cooling system into suitable container.
- Remove six scurviest from inside front splash shield.
- Remove four fender splash shield-to-air deflector bolts.
- Remove three deflector bolts.
- Remove two front bumper cover center scurviest from front bumper cover.
- Disconnect fog lamp electrical connectors, if equipped.
- Remove two front...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Escape RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Ford Escape AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Ford Escape cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Ford Escape XLS 2.3 L4 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from thermostat housing.
- Remove radiator outlet hose from thermostat housing and from vehicle.
- Reverse procedure to ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Escape RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Ford Escape AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Ford Escape cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2008 Ford Escape XLS 2.3 L4 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at coolant adapter assembly.
- Remove hose from coolant adapter assembly.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Drain cooling system into a suitable container.
- Reposition heater hose outlet clamp at heater core.
- Disconnect heater outlet hose from ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Escape RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Ford Escape vehicle. |
Access the Complete guide! |