Auto Parts Search
2008 Land Rover Range Rover Sport CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Land Rover REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
CV AXLE SHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 2008 Land Rover Range Rover Sport LE 4.2 V8 GAS
Front
- Position vehicle on lift.
- Select NEUTRAL in the main gearbox.
- Raise vehicle on lift.
- Raise one front wheel to allow propeller shaft to rotate.
- Reference mark propeller shaft and differential to aid reassembly.
- Remove 6 nuts and bolts securing drive flange and propeller shaft to coupling. Discard locking nuts.
- Pull propeller shaft forwards and remove coupling and centering flange.
- Remove propeller shaft.
- Remove and discard O-ring from differential output drive tube.
- Reverse procedure to install, noting the following:
- Lubricate and install new O-ring.
- Align reference marks.
- Check and...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Component Replacement -> Installation -> Removal -> Tire Pressure Sensor -> TPMS Front Antenna -> TPMS Monitor -> TPMS Rear Antenna
Vehicle: 2008 Land Rover Range Rover Sport HSE 4.4 V8 GAS
Tire Pressure Sensor
Removal
- Loosen the wheel lug nuts.
- Raise and support the vehicle with jack stands, then remove the wheel and tire assembly.
- Remove the tire valve cap and core and release the air from the tire.
- Separate the bead on the inside and outside of the tire, note the following:
- The bead breaker tool should not be used within 12 inch of the sensor valve in either direction.
- Position the shoe of the tool between 2 to 4 inches away from the sensor valve.
- The lever and tire must not come in contact with the sensor.
- Remove the tire pressure sensor nut, then the sensor, Fig....
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Alternator, Replace
Vehicle: 2008 Land Rover Range Rover Sport LE 4.2 V8 GAS
- Raise and support vehicle. Do not work on or under a vehicle supported only by a jack. Always support vehicle on safety stands.
- Disconnect battery ground cable.
- Remove cooling fan shroud.
- Disconnect cooling fan control electrical connector.
- Remove viscous fan, using suitable fan removal tools. Fan is righthand thread.
- Turn drive belt tensioner clockwise, using a suitable tool, and remove cooling fan drive belt from pulleys.
- Remove bolts and cooling fan drive pulley.
- Remove bolts and cooling fan drive hub bearing.
- Remove bolt and cooling fan belt tensioner.
- Turn drive belt tensioner c...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Cabin Air Filter Service -> Land Rover -> 2005-09 LR3 & 2006-09 Range Rover Sport
Vehicle: 2008 Land Rover Range Rover Sport LE 4.2 V8 GAS
Under normal operating conditions the cabin air filter should be replaced every 12 months or 15,000 miles.
- Open the glove compartment.
- Release the glove compartment release latches, Fig. .
- Remove the cabin air filter cover, Fig. .
- Remove the cabin air filter e...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Land Rover -> Anti-Lock Brake System Warning Lamp ->
Vehicle: 2008 Land Rover Range Rover Sport LE 4.2 V8 GAS
The ABS warning lamp should light when the ignition switch is placed in the On position and go out when after approximately 4 seconds. If the lamp remains illuminated or comes on while ...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Land Rover Range Rover Sport Supercharged 4.2 V8 GAS
Lower
- Drain coolant into a suitable container.
- Reposition hose clamp at radiator and remove hose.
- Reposition hose clamp at coolant outlet assembly and remove hose.
- Remove hose from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Serpentine Drive Belt, Replace -> Accessory Drive Belt -> Cooling Fan Drive Belt
Vehicle: 2008 Land Rover Range Rover Sport Supercharged 4.2 V8 GAS
Cooling Fan Drive Belt
- Disconnect battery ground cable.
- Remove cooling fan shroud.
- Disconnect cooling fan control electrical connector.
- Remove cooling fan, using suitable fan removal tools. Fan is righthand thread.
- Rotate belt tensioner arm clockwise, using a suitable tool to relieve tension from drive belt.
- Remove cooling fa...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Component location diagrams for most 2008 Land Rover Range Rover Sport cars and light trucks sold in the U.S. from 1990+.
Instrument Panel Components Diagram for 2008 Land Rover Range Rover Sport HSE 4.4 V8 GAS Components on diagram: |
Body Components Diagram for 2008 Land Rover Range Rover Sport LE 4.2 V8 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
OEM drawn wiring diagrams for most 2008 Land Rover Range Rover Sport cars and light trucks sold in the U.S.
2008 Land Rover Range Rover Sport LE 4.2 V8 GAS Wiring Diagram Components on diagram: |
2008 Land Rover Range Rover Sport HSE 4.4 V8 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
OEM TSB listings for most 2008 Land Rover Range Rover Sport cars and light trucks sold in the U.S. from 1985+.
Document: Rear Differential Pinion Oil Seal Availability Vehicle: 2008 Land Rover Range Rover Sport HSE 4.4 V8 GAS Auto Systems: |
Document: Chrome Scuff Plate Adrift - Repair Procedure Vehicle: 2008 Land Rover Range Rover Sport HSE 4.4 V8 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2008 Land Rover Range Rover Sport cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2008 Land Rover Range Rover Sport cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2008 Land Rover Range Rover Sport cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2008 Land Rover Range Rover Sport cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Land Rover Range Rover Sport vehicle. |
Access the Complete guide! |