Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Nissan Versa car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Nissan Versa automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Nissan Versa
- 2008 Nissan Versa SL 1.8 L4 GAS, CC:1798, Fuel Injection
- 2008 Nissan Versa S 1.8 L4 GAS, CC:1798, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Nissan Versa AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Nissan Versa cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Nissan Versa SL 1.8 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front tire. Before removing front axle assembly disconnect ABS wheel sensor from assembly. Move sensor away from front axle area. Failure to follow this instruction may result in damage to sensor wires.
- Remove wheel sensor from steering knuckle.
- Remove transverse link ball joint nut and bolt, then remove transverse link from steering knuckle.
- Remove cotter pin, then loosen hub lock nut using suitable tool. Discard old cotter pin and install new one upon installation. Tempor...
CLICK HERE TO GET FULL ACCESS TO 2008 Nissan Versa DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Nissan Versa AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Nissan Versa cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Nissan Versa S 1.8 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front tire. Before removing front axle assembly disconnect ABS wheel sensor from assembly. Move sensor away from front axle area. Failure to follow this instruction may result in damage to sensor wires.
- Remove wheel sensor from steering knuckle.
- Remove transverse link ball joint nut and bolt, then remove transverse link from steering knuckle.
- Remove cotter pin, then loosen hub lock nut using suitable tool. Discard old cotter pin and install new one upon installation. Tempor...
CLICK HERE TO GET FULL ACCESS TO 2008 Nissan Versa DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



