Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Pontiac Vibe car and truck
repair procedures including Pontiac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Pontiac Vibe automobile. Try the Automotix DIY solution today!
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Pontiac Vibe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Pontiac Vibe cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Reset Switch -> TPMS Control Module -> TPMS Pressure Sensor -> TPMS Receiver
Vehicle: 2008 Pontiac Vibe 1.8 L4 GAS
TPMS Pressure Sensor
If installing a replacement tire pressure sensor, note the identification number for use during relearn procedure. Refer to the "Relearn Procedure."
Removal
- Loosen the wheel lug nuts.
- Raise and support vehicle with jack stands.
- Remove the wheel and tire assembly.
- Remove the tire valve stem cap, then the valve stem and allow the tire to deflate.
- Remove the nut retaining the tire pressure warning valve and transmitter to the wheel assembly, then drop the transmitter inside the tire.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Posit...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Vibe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Pontiac Vibe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Pontiac Vibe cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2008 Pontiac Vibe 1.8 L4 GAS
The TPMS (Tire Pressure Monitor System) alerts the driver when a significant change in the pressure of one the four tire exists. The system uses the TPMS control module, TPMS receiver module, tire pressure sensor (one in each tire and wheel assembly), the serial data circuit and the instrument cluster. Each of the tire pressure sensors has an internal power source.
The TPMS sensor, measures the tire pressure and transmits the measure tire pressure along with the sensor transmitter identificatio...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Vibe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Pontiac Vibe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Pontiac Vibe cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2008 Pontiac Vibe 1.8 L4 GAS
If replacing the TPMS control module, prior to removal, use a suitably programmed scan tool to read the registered transmitter identification number for all wheels and note them for relearn procedure.
If installing a replacement tire pressure sensor, prior to installation note the Identification number for use during relearn procedure.
- Connect a suitably programmed scan tool to the DLC (Data Link Connector) located under the driver's side of the instrument panel and follow the instructions on the scan tool display.
- Using the scan tool, read a...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Vibe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Pontiac Vibe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Pontiac Vibe cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2008 Pontiac Vibe 1.8 L4 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Vibe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Pontiac Vibe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Pontiac Vibe cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2008 Pontiac Vibe 1.8 L4 GAS
- Inflate all tires to vehicle manufacturer's specifications.
- Place the ignition switch in the On position.
- Press and hold the tire pressure warning reset button until the tire pressure warning lamp blinks 3 times. Ens...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Vibe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Pontiac Vibe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Pontiac Vibe cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Trouble Code Identification -> Intermittent & Poor Connections -> Intermittents -> Poor Connections
Vehicle: 2008 Pontiac Vibe 1.8 L4 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to Data Link Connector (DLC), and follow instructions on the scan tool display.
Diagnostic Trouble Code Identification
Refer to Fig. for diagnostic trouble code identification.
Clearing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector), and follow instructions on the scan tool display.
Intermittent & Poor Connections
Intermittents
Most intermittents are caused by faulty electrical connections or wiring. Inspect for the following:
- Wiring broken inside insulation.
- Poor...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Vibe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Pontiac Vibe vehicle.
|
| Access the Complete guide! |
