Auto Parts Search
We have info for following modifications of 2008 Saab 9-3
- 2008 Saab 9-3 Aero 2.8 V6 GAS, CC:2792, CID:170, Fuel Injection, Aspiration:170, Engine VIN:, Desg:U
- 2008 Saab 9-3 2.0T 2.0 L4 GAS, CC:1985, Fuel Injection, Engine VIN:, Desg:Y
- 2008 Saab 9-3 Aero XWD 2.8 V6 GAS, CC:2792, CID:170, Fuel Injection, Aspiration:170, Engine VIN:, Desg:U
- 2008 Saab 9-3 Turbo X 2.8 V6 GAS, CC:2792, CID:170, Fuel Injection, Aspiration:170, Engine VIN:, Desg:U
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Saab 9-3 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2008 Saab 9-3 Aero XWD 2.8 V6 GAS
Remove
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove wheel hub center nut.
- Remove lower engine cover.
- On convertible models, remove chassis reinforcement at front subframe.
- On all models, remove steering swivel member bolt, lower swivel arm and place a wedge tool No. 83 95 238 or equivalent between swing arm and anti-roll bar.
- Detach brake hose from clip and ABS harness holder. Turn wheel for better access.
- Press out drive shaft from wheel hub about 10 mm, using puller tool No. 89 96 951or equivalent.
- If removing lefthand drive shaft, proceed as follows:
- Undo th...
CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Saab 9-3 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2008 Saab 9-3 Turbo X 2.8 V6 GAS
Remove
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove wheel hub center nut.
- Remove lower engine cover.
- On convertible models, remove chassis reinforcement at front subframe.
- On all models, remove steering swivel member bolt, lower swivel arm and place a wedge tool No. 83 95 238 or equivalent between swing arm and anti-roll bar.
- Detach brake hose from clip and ABS harness holder. Turn wheel for better access.
- Press out drive shaft from wheel hub about 10 mm, using puller tool No. 89 96 951or equivalent.
- If removing lefthand drive shaft, proceed as follows:
- Undo th...
CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Saab 9-3 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2008 Saab 9-3 2.0T 2.0 L4 GAS
Remove
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove wheel hub center nut.
- Remove lower engine cover.
- On convertible models, remove chassis reinforcement at front subframe.
- On all models, remove steering swivel member bolt, lower swivel arm and place a wedge tool No. 83 95 238 or equivalent between swing arm and anti-roll bar.
- Detach brake hose from clip and ABS harness holder. Turn wheel for better access.
- Press out drive shaft from wheel hub about 10 mm, using puller tool No. 89 96 951or equivalent.
- If removing lefthand drive shaft, proceed as follows:
- Undo th...
CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Saab 9-3 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2008 Saab 9-3 Aero 2.8 V6 GAS
Remove
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove wheel hub center nut.
- Remove lower engine cover.
- On convertible models, remove chassis reinforcement at front subframe.
- On all models, remove steering swivel member bolt, lower swivel arm and place a wedge tool No. 83 95 238 or equivalent between swing arm and anti-roll bar.
- Detach brake hose from clip and ABS harness holder. Turn wheel for better access.
- Press out drive shaft from wheel hub about 10 mm, using puller tool No. 89 96 951or equivalent.
- If removing lefthand drive shaft, proceed as follows:
- Undo th...
CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Saab 9-3 vehicle. |
Access the Complete guide! |