Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Saab 9-3 car and truck
repair procedures including Saab engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Saab 9-3 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Saab 9-3
- 2008 Saab 9-3 Aero 2.8 V6 GAS, CC:2792, CID:170, Fuel Injection, Aspiration:170, Engine VIN:, Desg:U
- 2008 Saab 9-3 2.0T 2.0 L4 GAS, CC:1985, Fuel Injection, Engine VIN:, Desg:Y
- 2008 Saab 9-3 Aero XWD 2.8 V6 GAS, CC:2792, CID:170, Fuel Injection, Aspiration:170, Engine VIN:, Desg:U
- 2008 Saab 9-3 Turbo X 2.8 V6 GAS, CC:2792, CID:170, Fuel Injection, Aspiration:170, Engine VIN:, Desg:U
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Saab 9-3 cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2008 Saab 9-3 2.0T 2.0 L4 GAS
Refer to Fig. for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Saab 9-3 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2008 Saab 9-3 2.0T 2.0 L4 GAS
The control module monitors the tire pressure sensor transmissions for the first few minutes to determine the location of each of the sensors. The system is considered self-teaching, maki...
CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Saab 9-3 cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Control Module -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2008 Saab 9-3 Aero 2.8 V6 GAS
Tire Pressure Indicator Sensor
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Do not apply tire changer tool within 10° of either side of the tire pressure sensor valve stem, Fig. .
- Start in area 180° from the tire pressure sensor valve stem.
- Remove the rear side tire bead first.
- Deflate the tire completely.
- Use a suitable tire changer to remove the tire from the wheel. A rim clamp European type tire changer is recommended.
- Carefully, remov...
CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Saab 9-3 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2008 Saab 9-3 Aero XWD 2.8 V6 GAS
The control module monitors the tire pressure sensor transmissions for the first few minutes to determine the location of each of the sensors. The system is considered self-teaching, maki...
CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Saab 9-3 cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Control Module -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2008 Saab 9-3 2.0T 2.0 L4 GAS
Tire Pressure Indicator Sensor
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Do not apply tire changer tool within 10° of either side of the tire pressure sensor valve stem, Fig. .
- Start in area 180° from the tire pressure sensor valve stem.
- Remove the rear side tire bead first.
- Deflate the tire completely.
- Use a suitable tire changer to remove the tire from the wheel. A rim clamp European type tire changer is recommended.
- Carefully, remov...
CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Saab 9-3 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Saab 9-3 cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2008 Saab 9-3 Aero 2.8 V6 GAS
Refer to Fig. for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Saab 9-3 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Saab 9-3 vehicle.
|
| Access the Complete guide! |
