Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Chevrolet Malibu car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Chevrolet Malibu automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Chevrolet Malibu
- 2009 Chevrolet Malibu LS 3.5 V6 GAS, CC:3490, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:N
- 2009 Chevrolet Malibu LS 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:B
- 2009 Chevrolet Malibu LT 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
- 2009 Chevrolet Malibu LT 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:B
- 2009 Chevrolet Malibu LTZ 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
- 2009 Chevrolet Malibu LTZ 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:B
- 2009 Chevrolet Malibu Hybrid 2.4 L4 ELECTRIC/GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Chevrolet Malibu AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Chevrolet Malibu cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Chevrolet Malibu LT 2.4 L4 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Malibu DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Chevrolet Malibu AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Chevrolet Malibu cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Chevrolet Malibu LS 2.4 L4 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Malibu DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Chevrolet Malibu AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Chevrolet Malibu cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Chevrolet Malibu LTZ 3.6 V6 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Malibu DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Chevrolet Malibu AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Chevrolet Malibu cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Chevrolet Malibu LS 3.5 V6 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Malibu DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Chevrolet Malibu AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Chevrolet Malibu cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Chevrolet Malibu LT 3.6 V6 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Malibu DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Chevrolet Malibu AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Chevrolet Malibu cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Chevrolet Malibu Hybrid 2.4 L4 ELECTRIC/GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Malibu DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Chevrolet Malibu vehicle.
|
| Access the Complete guide! |
