Auto Parts Search
We have info for following modifications of 2009 Dodge Journey
- 2009 Dodge Journey SXT 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:S
- 2009 Dodge Journey R/T 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:S
- 2009 Dodge Journey SE 2.4 L4 GAS, CC:2360, CID:144, Fuel Injection, Aspiration:144, Engine VIN:, Desg:B
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Dodge Journey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Dodge Journey cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 Dodge Journey R/T 3.5 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Drain differential carrier oil into suitable container.
- Mark rear propeller shaft and differential, Fig. , for proper installation.
- Remove rear propeller shaft to rear axle retaining nuts.
- Remove three bolts from center support heat shield, then heat shield.
- Remove center support mount...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Journey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Dodge Journey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Dodge Journey cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2009 Dodge Journey R/T 3.5 V6 GAS
Front
Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
Lefthand halfshaft is shorter than right. Identify and tag halfshafts upon removal to ensure proper installation.
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Remove cotter pin, nut lock, spring washer, and hub nut from end of outer C/V joint stub axle.
- Disconnect front wheel speed sensor and secure harness aside.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Journey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Dodge Journey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Dodge Journey cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2009 Dodge Journey SXT 3.5 V6 GAS
Front
Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
Lefthand halfshaft is shorter than right. Identify and tag halfshafts upon removal to ensure proper installation.
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Remove cotter pin, nut lock, spring washer, and hub nut from end of outer C/V joint stub axle.
- Disconnect front wheel speed sensor and secure harness aside.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Journey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Dodge Journey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Dodge Journey cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 Dodge Journey SE 2.4 L4 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Drain differential carrier oil into suitable container.
- Mark rear propeller shaft and differential, Fig. , for proper installation.
- Remove rear propeller shaft to rear axle retaining nuts.
- Remove three bolts from center support heat shield, then heat shield.
- Remove center support mount...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Journey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Dodge Journey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Dodge Journey cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2009 Dodge Journey SE 2.4 L4 GAS
Front
Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
Lefthand halfshaft is shorter than right. Identify and tag halfshafts upon removal to ensure proper installation.
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Remove cotter pin, nut lock, spring washer, and hub nut from end of outer C/V joint stub axle.
- Disconnect front wheel speed sensor and secure harness aside.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Journey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Dodge Journey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Dodge Journey cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 Dodge Journey SXT 3.5 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Drain differential carrier oil into suitable container.
- Mark rear propeller shaft and differential, Fig. , for proper installation.
- Remove rear propeller shaft to rear axle retaining nuts.
- Remove three bolts from center support heat shield, then heat shield.
- Remove center support mount...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Journey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Dodge Journey vehicle. |
Access the Complete guide! |