Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Ford Focus car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Ford Focus automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Ford Focus
- 2009 Ford Focus SE 2.0 L4 GAS, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:N
- 2009 Ford Focus SES 2.0 L4 GAS, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:N
- 2009 Ford Focus S 2.0 L4 GAS, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:N
- 2009 Ford Focus SEL 2.0 L4 GAS, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:N
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Focus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Focus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate shaft -> Left side -> Right side
Vehicle: 2009 Ford Focus SES 2.0 L4 GAS
Left side
- Loosen lefthand strut and spring assembly top mount nuts by four turns.
- Loosen wheel nuts.
- Loosen wheel hub retaining nut.
- Raise and support vehicle.
- Remove lefthand wheel.
- . Detach lefthand lower arm.
- Remove pinch bolt from ball joint stud. Protect ball joint seat using a soft cloth to prevent damage.
- Detach lower arm ball joint.
- Detach lefthand drive halfshaft from wheel hub by using a commercially available puller. Unscrew and remove hub retaining nut and press out halfshaft stub from wheel hub.
- Support halfshaft. Inner halfshaft joint must not be bent by more than 18 ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Focus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Focus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Focus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate shaft -> Left side -> Right side
Vehicle: 2009 Ford Focus SEL 2.0 L4 GAS
Left side
- Loosen lefthand strut and spring assembly top mount nuts by four turns.
- Loosen wheel nuts.
- Loosen wheel hub retaining nut.
- Raise and support vehicle.
- Remove lefthand wheel.
- . Detach lefthand lower arm.
- Remove pinch bolt from ball joint stud. Protect ball joint seat using a soft cloth to prevent damage.
- Detach lower arm ball joint.
- Detach lefthand drive halfshaft from wheel hub by using a commercially available puller. Unscrew and remove hub retaining nut and press out halfshaft stub from wheel hub.
- Support halfshaft. Inner halfshaft joint must not be bent by more than 18 ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Focus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Focus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Focus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate shaft -> Left side -> Right side
Vehicle: 2009 Ford Focus S 2.0 L4 GAS
Left side
- Loosen lefthand strut and spring assembly top mount nuts by four turns.
- Loosen wheel nuts.
- Loosen wheel hub retaining nut.
- Raise and support vehicle.
- Remove lefthand wheel.
- . Detach lefthand lower arm.
- Remove pinch bolt from ball joint stud. Protect ball joint seat using a soft cloth to prevent damage.
- Detach lower arm ball joint.
- Detach lefthand drive halfshaft from wheel hub by using a commercially available puller. Unscrew and remove hub retaining nut and press out halfshaft stub from wheel hub.
- Support halfshaft. Inner halfshaft joint must not be bent by more than 18 ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Focus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Focus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Focus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate shaft -> Left side -> Right side
Vehicle: 2009 Ford Focus SE 2.0 L4 GAS
Left side
- Loosen lefthand strut and spring assembly top mount nuts by four turns.
- Loosen wheel nuts.
- Loosen wheel hub retaining nut.
- Raise and support vehicle.
- Remove lefthand wheel.
- . Detach lefthand lower arm.
- Remove pinch bolt from ball joint stud. Protect ball joint seat using a soft cloth to prevent damage.
- Detach lower arm ball joint.
- Detach lefthand drive halfshaft from wheel hub by using a commercially available puller. Unscrew and remove hub retaining nut and press out halfshaft stub from wheel hub.
- Support halfshaft. Inner halfshaft joint must not be bent by more than 18 ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Focus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
