Auto Parts Search
2009 Ford Taurus CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Ford REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Brake Service
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Ford Taurus car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your Ford Taurus automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2009 Ford Taurus AUTOMOBILES
Disc Brakes -> Front Disc Brakes -> Caliper Service -> Assemble -> Cobra -> Crown Victoria, Fusion, Grand Marquis, Milan, MKZ, MKS, Sable, Taurus, Taurus X & Town Car -> Disassemble -> Except Cobra -> Focus -> Inspection -> Mustang -> Overhaul -> Replacement
Vehicle: 2009 Ford Taurus Limited 3.5 V6 GAS
Replacement
On models with anti-lock brakes, the brake booster system must be depressurized before disconnecting any hydraulic lines or fittings. Depressurize the system by pumping the brake pedal at least 25 times with the ignition in the Off position.
Crown Victoria, Fusion, Grand Marquis, Milan, MKZ, MKS, Sable, Taurus, Taurus X & Town Car
Before removing calipers, mark lefthand and righthand calipers so they can be installed in their original position.
- On models equipped with air suspension, turn air suspension service switch to Off position.
- On all models, raise and support fron...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus BRAKE SERVICE PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Taurus AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2009 Ford Taurus Limited 3.5 V6 GAS
- Remove center hub cap from wheel.
- Loosen hub nut.
- Raise and support vehicle.
- Remove front wheel and tire assembly.
- Remove hub nut and washer.
- Remove front brake anti-lock sensor harness from clip.
- Remove and position front brake anti-lock sensor aside.
- Remove and discard lower ball joint nut.
- Remove lower strut support nut and bolt. Discard nut.
- Using suitable tools, press ball joint stud until it is loose in knuckle.
- Wire knuckle to strut. This will prevent knuckle from falling off of strut while knuckle and lower ball joint are separated. Failure to follow these instructions may ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Ford Taurus AUTOMOBILES
Component Replacement -> Installation -> Removal -> TPMS Sensor -> TPMS Sensor Strap & Cradle
Vehicle: 2009 Ford Taurus Limited 3.5 V6 GAS
TPMS Sensor
Removal
Tire pressure sensors are manufactured in multiple colors based on their application. When installing a new sensor, make sure the color of the sensor being installed matches the color of the sensor that was removed. The different colored sensors are not interchangeable, Fig. .
- Loosen the wheel and tire assembly lug nuts.
- Raise and support the vehicle with jack stands.
- Remove the wheel and tire assembly.
- Position the wheel and tire assembly on a suitable tire changing machine as follows:
- On a paddle type tire machine, position the valve step at 12 o'clock or 6 ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Ford Taurus AUTOMOBILES
Alternator, Replace
Vehicle: 2009 Ford Taurus SE 3.5 V6 GAS
- Disconnect battery.
- Remove engine cover.
- Position upper radiator hose aside and remove upper radiator hose cradle.
- Remove alternator B+ nut and terminal.
- Disconnect alternator electrical connector and position engine wiring harness aside.
- Rotate accessory drive belt tensioner and position accessory drive belt aside.
- Remove upp...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus STARTER & ALTERNATOR REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Ford Taurus AUTOMOBILES
Ford Motor Co. Cars -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2008-09 Taurus & Taurus X -> Relearn -> Reset -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2009 Ford Taurus SE 3.5 V6 GAS
Reset
If the system detects low tire pressure, CHECK TIRE PRESSURE lamp will illuminate. Inflating tire(s) to recommended pressure will clear the tire message. Up to two minutes of driving above 20 mph may be required for the warning lamp to turn OFF after the tires have been filled to the recommended pressure.
Relearn
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Ford Taurus AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2009 Ford Taurus SEL 3.5 V6 GAS
Inlet
- Drain coolant into a suitable container.
- Loosen hose clamp connecting hose to heater core inlet tube.
- Loosen hose clamp connecting hose to thermostat housing.
- Remove hose from vehicle.
- Reverse procedure to...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Ford Taurus AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Ford Taurus SE 3.5 V6 GAS
- Rotate belt tensioner clockwise using a suitable belt tension release tool.
- Remove belt from alternator pulley.
- Raise and support vehicle.
- Remove four screws and 6 pin-type retainers, then the righthand fender splash shield.
- Remove accessory drive belt.
- Install a suitable power steering belt removal tool, between power steering pump be...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Ford Taurus AUTOMOBILES
OEM TSB listings for most 2009 Ford Taurus cars and light trucks sold in the U.S. from 1985+.
|
Document: 6F50 Transmission With A Moan Or Buzz Type Noise On 4-5 Upshift Or 5-6 Upshift Vehicle: 2009 Ford Taurus SEL 3.5 V6 GAS Symptoms: |
|
Document: SERVICE TIP - POWER TAKE-OFF UNIT (PTU) - RIGHT HAND INTERMEDIATE SHAFT SEAL LEAKS Vehicle: 2009 Ford Taurus SEL 3.5 V6 GAS Symptoms: |
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Ford Taurus AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Ford Taurus cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Ford Taurus cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Ford Taurus cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Ford Taurus cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Taurus SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
| More parts |
