Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Lincoln MKS car and truck
repair procedures including Lincoln engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Lincoln MKS automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2009 Lincoln MKS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Lincoln MKS cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Troubleshooting -> Abnormal Conditions -> Brake Booster Operation Test -> Brake Master Cylinder -> Brake Roughness -> Bypass Condition Inspection -> Lateral Runout -> Non-Pressure Leaks -> Normal Conditions -> Thickness Variation -> Wheel Bearing Looseness
Vehicle: 2009 Lincoln MKS 3.7 V6 GAS
Brake Roughness
Thickness Variation
If roughness or vibration is encountered during highway operation or if pedal pumping is experienced at low speeds, the disc may have excessive thickness variation. Measure the disc at 12 points with a micrometer at a radius approximately one inch from edge of disc. If thickness measurements vary by more than .0005 inch, replace the disc.
Lateral Runout
Excessive lateral runout of braking disc may cause a knocking back of the pistons, possibly creating increased pedal travel and vibration when brakes are applied.
Wheel Bearing Looseness
Adjust the w...
CLICK HERE TO GET FULL ACCESS TO 2009 Lincoln MKS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Lincoln MKS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Lincoln MKS cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> Assemble -> Cobra -> Crown Victoria, Fusion, Grand Marquis, Milan, MKZ, MKS, Sable, Taurus, Taurus X & Town Car -> Disassemble -> Except Cobra -> Focus -> Inspection -> Mustang -> Overhaul -> Replacement
Vehicle: 2009 Lincoln MKS 3.7 V6 GAS
Replacement
On models with anti-lock brakes, the brake booster system must be depressurized before disconnecting any hydraulic lines or fittings. Depressurize the system by pumping the brake pedal at least 25 times with the ignition in the Off position.
Crown Victoria, Fusion, Grand Marquis, Milan, MKZ, MKS, Sable, Taurus, Taurus X & Town Car
Before removing calipers, mark lefthand and righthand calipers so they can be installed in their original position.
- On models equipped with air suspension, turn air suspension service switch to Off position.
- On all models, raise and support fron...
CLICK HERE TO GET FULL ACCESS TO 2009 Lincoln MKS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Lincoln MKS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Lincoln MKS cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Rotor Replace -> Crown Victoria, Grand Marquis & Town Car -> Fusion, Milan, MKZ, Mustang, MKS, Sable, Taurus & Taurus X -> Installation -> Removal
Vehicle: 2009 Lincoln MKS 3.7 V6 GAS
Fusion, Milan, MKZ, Mustang, MKS, Sable, Taurus & Taurus X
Removal
- Remove rear disc brake caliper as outlined in . Do not disconnect flexible hose unless caliper requires service.
- Support caliper with suitable wire or tie strap so flexible hose is not stretched or twisted.
- Remove rear disc support bracket to wheel knuckle bolts.
- Remove rear disc support bracket and brake shoes and linings.
- Remove two nuts and rotor.
Installation
- If installing new rotor, remove protective coating from rotor with suitable carburetor cleaner.
- Lubricate rear hub pilot diameter with suitable grease.
- Install roto...
CLICK HERE TO GET FULL ACCESS TO 2009 Lincoln MKS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Lincoln MKS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Lincoln MKS cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Precautions -> System Depressurizing
Vehicle: 2009 Lincoln MKS 3.7 V6 GAS
System Depressurizing
On models equipped with anti-lock brakes, hydraulic system must be depressurized prior to ...
CLICK HERE TO GET FULL ACCESS TO 2009 Lincoln MKS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Lincoln MKS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Lincoln MKS cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> System Priming -> Wheel Bleeding Sequence
Vehicle: 2009 Lincoln MKS 3.7 V6 GAS
Pressure bleeding is recommended for all hydraulic brake systems. Ensure all dirt and contaminants are removed from master cylinder area prior to removing reservoir cap.
To prevent air from the pressure tank getting into the lines, do not shake the tank while air is being added to the tank or after it has been pressurized. Set the tank in the required location, bring the air hose to the tank, and do not move it during the bleeding operation. The tank should be kept at least one-third full.
On vehicles equipped with disc brakes and master cylinders without proportioners or press...
CLICK HERE TO GET FULL ACCESS TO 2009 Lincoln MKS BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Lincoln MKS AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Lincoln MKS cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> 4.6L Engine -> Crown Victoria, Grand Marquis & Town Car -> Focus -> Fusion, Milan & MKZ -> MKS, Sable, Taurus & Taurus X -> Mustang -> Overhaul -> Power Booster, Replace
Vehicle: 2009 Lincoln MKS 3.7 V6 GAS
Power Booster, Replace
Crown Victoria, Grand Marquis & Town Car
- Disconnect fluid level sensor connector.
- Position speed control cable aside.
- Disconnect power brake booster check valve.
- Remove brake master cylinder mounting nuts.
- Remove wiring harness bracket and position aside.
- Remove brake master cylinder and position aside.
- Remove push-pins and instrument close-out panel.
- Remove stoplight switch retaining pin.
- Slide stoplight switch and booster push rod off brake pedal pin.
- Remove mounting nuts and power brake booster.
- Reverse procedure to install. Torque mounting nuts to 16-21 f...
CLICK HERE TO GET FULL ACCESS TO 2009 Lincoln MKS BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
