Auto Parts Search
We have info for following modifications of 2009 Nissan Versa
- 2009 Nissan Versa SL 1.8 L4 GAS, CC:1798, Fuel Injection
- 2009 Nissan Versa S 1.8 L4 GAS, CC:1798, Fuel Injection
- 2009 Nissan Versa 1.6 1.6 L4 GAS, CC:1598, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Versa cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Nissan Versa SL 1.8 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front tire. Before removing front axle assembly disconnect ABS wheel sensor from assembly. Move sensor away from front axle area. Failure to follow this instruction may result in damage to sensor wires.
- Remove wheel sensor from steering knuckle.
- Remove transverse link ball joint nut and bolt, then remove transverse link from steering knuckle.
- Remove cotter pin, then loosen hub lock nut using suitable tool. Discard old cotter pin and install new one upon installation. Tempor...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Versa cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Nissan Versa 1.6 1.6 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front tire. Before removing front axle assembly disconnect ABS wheel sensor from assembly. Move sensor away from front axle area. Failure to follow this instruction may result in damage to sensor wires.
- Remove wheel sensor from steering knuckle.
- Remove transverse link ball joint nut and bolt, then remove transverse link from steering knuckle.
- Remove cotter pin, then loosen hub lock nut using suitable tool. Discard old cotter pin and install new one upon installation. Tempor...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Versa cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Nissan Versa S 1.8 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front tire. Before removing front axle assembly disconnect ABS wheel sensor from assembly. Move sensor away from front axle area. Failure to follow this instruction may result in damage to sensor wires.
- Remove wheel sensor from steering knuckle.
- Remove transverse link ball joint nut and bolt, then remove transverse link from steering knuckle.
- Remove cotter pin, then loosen hub lock nut using suitable tool. Discard old cotter pin and install new one upon installation. Tempor...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Nissan Versa vehicle. |
Access the Complete guide! |