Auto Parts Search
2009 Nissan Versa CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Nissan REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 2009 Nissan Versa S 1.8 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front tire. Before removing front axle assembly disconnect ABS wheel sensor from assembly. Move sensor away from front axle area. Failure to follow this instruction may result in damage to sensor wires.
- Remove wheel sensor from steering knuckle.
- Remove transverse link ball joint nut and bolt, then remove transverse link from steering knuckle.
- Remove cotter pin, then loosen hub lock nut using suitable tool. Discard old cotter pin and install new one upon installation. Tempor...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Component Replacement -> Body Control Module -> Installation -> Removal -> Transmitter
Vehicle: 2009 Nissan Versa SL 1.8 L4 GAS
Transmitter
Removal
- Deflate tire, then remove retaining nut an allow transmitter to fall into tire.
- Gently bounce tire so transmitter falls to bottom of tire.
- Place tire on suitable tire changing machine and break both tire beads. Ensure transmitter remains at bottom of tire.
- Turn tire so valve hole is at bottom, then bounce tire so transmitter is near valve hole.
- Lift tire onto turntable and position valve hole 270° from mounting/dismounting head, Fig. .
- Lubricate tire, then remove first side of tire.
- Reach inside of tire and remove transmitter.
- Remove second side of tire.
Installa...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Alternator, Replace
Vehicle: 2009 Nissan Versa SL 1.8 L4 GAS
- Disconnect battery ground terminal.
- Remove drive belt.
- Disconnect alternator harness connectors.
- Remove B+ terminal nut.
- Remove harness bracket and position aside.
- Remove alternator bolts.
- Remove alt...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Cabin Air Filter Service -> Nissan -> 2007-09 Versa
Vehicle: 2009 Nissan Versa S 1.8 L4 GAS
Under normal operating conditions the cabin air filter should be replaced every 12 months or 15,000 miles. In dusty areas change the cabin air filter more often.
- Remove the glove compartment from the instrument panel, Fig. .
- Move the cabin air filter downward while sliding it toward the righthand side of the vehicle to release th...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Nissan -> All Wheel Drive (AWD) Warning Lamp ->
Vehicle: 2009 Nissan Versa 1.6 1.6 L4 GAS
When the ignition switch is placed in the on position, the AWD warning lamp will light as a bulb check but should go off soon after the engine is started. If a malfunction in the AWD system exist or if fr...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Radiator, Replace
Vehicle: 2009 Nissan Versa 1.6 1.6 L4 GAS
- Drain engine coolant from radiator using a suitable container.
- Remove inlet air duct.
- Remove reservoir tank as follows:
- Disconnect reservoir tank hose.
- Release tab in direction toward engine.
- Lift up while removing reservoir tank hose, and remove it.
- Disconnect harness connector from fan motors, and move harness to aside.
- Disconnect CVT or A/T fluid cooler hoses if equipped. Install plug to avoid leakage of CVT or A/T fluid if equipped.
- Remove up...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Nissan Versa AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Nissan Versa S 1.8 L4 GAS
- Rotate or lift belt tensioner arm clockwise, using a suitable tool to relieve tension from dri...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Nissan Versa AUTOMOBILES
OEM TSB listings for most 2009 Nissan Versa cars and light trucks sold in the U.S. from 1985+.
Document: A/C SYSTEM O-RING SEAL LEAKS Vehicle: 2009 Nissan Versa SL 1.8 L4 GAS Auto Systems: |
Document: POWER WINDOW AUTO UP INITIALIZATION Vehicle: 2009 Nissan Versa SL 1.8 L4 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Nissan Versa AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Nissan Versa cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Nissan Versa cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Nissan Versa cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Nissan Versa cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Versa SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Nissan Versa vehicle. |
Access the Complete guide! |