Auto Parts Search
We have info for following modifications of 2009 Subaru Tribeca
- 2009 Subaru Tribeca Limited 3.6 H6 GAS, CC:3630, Fuel Injection
- 2009 Subaru Tribeca 3.6 H6 GAS, CC:3630, Fuel Injection
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Subaru Tribeca AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Subaru Tribeca cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2009 Subaru Tribeca Limited 3.6 H6 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2009 Subaru Tribeca TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Subaru Tribeca AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Subaru Tribeca cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Trouble Code Identification
Vehicle: 2009 Subaru Tribeca 3.6 H6 GAS
Accessing Diagnostic Trouble Codes
Use Subaru diagnostic monitor, or other suitable diagnostic monitor, to access diagnosis trouble codes. Follow diagnostic monitor manufacturer's instructions.
Diagnostic Trouble Code Identificatio...
CLICK HERE TO GET FULL ACCESS TO 2009 Subaru Tribeca TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Subaru Tribeca AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Subaru Tribeca cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2009 Subaru Tribeca 3.6 H6 GAS
Refer to Fig. for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2009 Subaru Tribeca TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Subaru Tribeca AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Subaru Tribeca cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Transmitter ID Registration
Vehicle: 2009 Subaru Tribeca 3.6 H6 GAS
Transmitter ID Registration
The following procedure must be performed when tire pressure sensor or TPMS control module is replaced. If tire pressure sensor transmitter ID cannot be registered after two attempts, replace the TPMS control module. If the registration procedure is not performed for 5 minutes or more or if the ignition switch is placed in the Off position, the registration mode will be cancelled.
- Check and adjust all tires to the recommended pressure.
- Connect the Subaru Select Monitor tool, or equivalent tool, then select Each System Check, Tire Pressure Monitor and ...
CLICK HERE TO GET FULL ACCESS TO 2009 Subaru Tribeca TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Subaru Tribeca AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Subaru Tribeca cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Clamp In Type -> Installation -> Removal -> Tire Pressure Sensor -> TPMS Control Module
Vehicle: 2009 Subaru Tribeca 3.6 H6 GAS
Tire Pressure Sensor
Clamp In Type
When replacing the tire pressure sensor, the transmitter ID will need to be registered to the TPMS control module, Refer to "Relearn Procedures" "Transmitter ID Registration."
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Release the air pressure from the tire.
- Remove the tire pressure sensor retaining nut and drop the sensor into the tire and wheel assembly, Fig. .
- Using a suitable tire changer, remove the tire upper bead from the wheel, then lift out the tire pressure sensor.
...
CLICK HERE TO GET FULL ACCESS TO 2009 Subaru Tribeca TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Subaru Tribeca AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Subaru Tribeca cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2009 Subaru Tribeca Limited 3.6 H6 GAS
Refer to Fig. for wirin...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2009 Subaru Tribeca TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Subaru Tribeca vehicle. |
Access the Complete guide! |