Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Toyota Highlander car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Toyota Highlander automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Toyota Highlander
- 2009 Toyota Highlander 3.5 V6 GAS, CC:3456, Fuel Injection
- 2009 Toyota Highlander 2.7 L4 GAS, CC:2672, CID:163, Fuel Injection, Aspiration:163
- 2009 Toyota Highlander Hybrid Limited 3.3 V6 ELECTRIC/GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2009 Toyota Highlander Hybrid 3.3 V6 ELECTRIC/GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2009 Toyota Highlander Limited 3.5 V6 GAS, CC:3456, Fuel Injection
- 2009 Toyota Highlander Sport 3.5 V6 GAS, CC:3456, Fuel Injection
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Highlander AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Highlander cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2009 Toyota Highlander Sport 3.5 V6 GAS
Refer toFigs. and for wir...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Highlander TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Highlander AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Highlander cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2009 Toyota Highlander Hybrid 3.3 V6 ELECTRIC/GAS
Refer toF...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Highlander TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Highlander AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Highlander cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS ECU -> TPMS Pressure Warning Valve & Transmitter -> TPMS Receiver -> TPMS Reset Switch
Vehicle: 2009 Toyota Highlander Hybrid Limited 3.3 V6 ELECTRIC/GAS
TPMS Pressure Warning Valve & Transmitter
If installing a replacement tire pressure warning valve and transmitter, note the identification number for use during registration. Refer to the Registration under the "Relearn Procedures."
Removal
- Loosen the wheel lug nuts.
- Raise and support vehicle with jack stands.
- Remove the wheel and tire assembly.
- Remove the tire valve stem cap, then the valve stem core and allow the tire to deflate, Fig. .
- Remove the nut retaining the tire pressure warning valve and transmitter to the wheel assembly, then drop the transmitter inside the tire.
- Using a...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Highlander TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Highlander AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Highlander cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS ECU -> TPMS Pressure Warning Valve & Transmitter -> TPMS Receiver -> TPMS Reset Switch
Vehicle: 2009 Toyota Highlander Limited 3.5 V6 GAS
TPMS Pressure Warning Valve & Transmitter
If installing a replacement tire pressure warning valve and transmitter, note the identification number for use during registration. Refer to the Registration under the "Relearn Procedures."
Removal
- Loosen the wheel lug nuts.
- Raise and support vehicle with jack stands.
- Remove the wheel and tire assembly.
- Remove the tire valve stem cap, then the valve stem core and allow the tire to deflate, Fig. .
- Remove the nut retaining the tire pressure warning valve and transmitter to the wheel assembly, then drop the transmitter inside the tire.
- Using a...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Highlander TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Highlander AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Highlander cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Registration -> System Initialization -> Tire Pressure Sensor & Transmitter -> TPMS ECU
Vehicle: 2009 Toyota Highlander Limited 3.5 V6 GAS
Registration
TPMS ECU
If replacing the TPMS ECU, prior to removal, use a suitably programmed scan tool to read the registered transmitter identification number for all wheels and note them for registration.
- Connect a suitably programmed scan tool to DLC3 located under the LH side of the instrument panel.
- Using the scan tool, note the registered transmitter IDs that are stored in the old TPMS ECU.
- If reading the stored transmitter IDs from the old TPMS ECU is not possible, the tires will need to be removed from the wheels to read and note the tire pressure sensor transmitter IDs.
- Wi...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Highlander TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Toyota Highlander AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Toyota Highlander cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2009 Toyota Highlander Hybrid 3.3 V6 ELECTRIC/GAS
This warning lamp will illuminate when tire pressure falls below a specified psi. When the warning lamp illuminates, check the air...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Highlander TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
