Auto Parts Search
Volvo V50 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Volvo REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Year
2010 | 2009 | 2008 | 2007 |
2006 | 2005 |

FUEL FILTER REPLACEMENT PROCEDURES FOR Volvo V50 AUTOMOBILES
Fuel filter replacement procedures with corresponding images for most domestic and imported Volvo V50 cars and light trucks sold in the U.S. for 1980+.
Volvo -> Fuel Filter Replacement -> S40 w/2.4L & 2.5L Engines & V50 -> Fuel System Pressure Relief -> Removal & Installation
Vehicle: 2005 Volvo V50 I 2.4 L5 GAS
Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.
Always disconnect the battery ground cable before replacing the fuel filter. Position a shop towel over fuel filter connections before disconnecting.
Fuel Sy...
CLICK HERE TO GET FULL ACCESS TO Volvo V50 FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR Volvo V50 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported Volvo V50 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Left Side -> Right Side
Vehicle: 2010 Volvo V50 T5 R-DESIGN 2.5 L5 GAS
Left Side
- Raise and support vehicle on lift.
- Remove hub cap.
- Remove front wheel lug nuts.
- Remove bolt for wheel hub driveshaft.
- Tap end of drive shaft approximately 15-20mm into wheel hub.
- Remove anti-roll bar strut from spring strut.
- Counterhold ball joint pinion so that ball joint boot cannot turn.
- Detach brake hose from its mounting lug in spring strut.
- Detach ABS line from its mounting lug in wheel arch.
- Slacken off nut for ball joint for control arm. Before removing the nuts from the ball joints, clean the exposed threads of rust. Lubricate using rust solvent before removing t...
CLICK HERE TO GET FULL ACCESS TO Volvo V50 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR Volvo V50 AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported Volvo V50 cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2006 Volvo V50 2.4I 2.4 L5 GAS
There are two ways to relearn a tire pressure sensor ID. Drive the vehicle faster than 25 mph for longer than 10 minutes. The warning for low tire pressure remains in the DIM (Driver Informati...
CLICK HERE TO GET FULL ACCESS TO Volvo V50 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR Volvo V50 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported Volvo V50 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Volvo V50 2.4I 2.4 L5 GAS
- Turn ignition off.
- Disconnect battery negative cable.
- Remove auxiliaries drive belt.
- Remove power steering pump.
- Remove turbo hose from air conditioning aggregate. Push hose to one side.
- Clamp upper radiator hose, remove hose from radiator and push to one side.
- Loosen lower screws ...
CLICK HERE TO GET FULL ACCESS TO Volvo V50 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR Volvo V50 AUTOMOBILES
Cabin air filter locations and replacement procedures with corresponding images for most domestic and imported Volvo V50 cars and light trucks sold in the U.S. as equipped to the current model year.
Cabin Air Filter Service -> Volvo -> 2005-09 S40, V50 & 2006-09 C70
Vehicle: 2005 Volvo V50 I 2.4 L5 GAS
The cabin air filter should be replaced every 15,000 miles. The filter should be replaced more often if air flow is less than normal.
- Remove the four hidden instrument panel center cover clips, then the cover, Fig. .
- Using a weather strip tool, or other suitable tool, remove the left instrument panel end cover. Use care not to damage the cover during removal.
- From the left end of the instrument panel, remove the sound proofing panel retaining clip, Fig. .
- Remove the three driver side sound proofing panel retaining screws, Fig. .
- Detach the in-car temperature sensor fro...
CLICK HERE TO GET FULL ACCESS TO Volvo V50 CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR Volvo V50 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported Volvo V50 cars and light trucks sold in the U.S. from 1990+.
Volvo -> Anti-Lock Brake System (ABS)/Dynamic Stability & Traction Control (DSTC)/Stability Traction Control (STC) Warning Lamp ->
Vehicle: 2008 Volvo V50 2.4I 2.4 L5 GAS
The warning lamp is used to warn of an system fault. The lamp input monitors the condition of the system. The lamp will be lit during engine start-up, but should go out when the self-diagnostic sy...
CLICK HERE TO GET FULL ACCESS TO Volvo V50 MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR Volvo V50 AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported Volvo V50 cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Volvo V50 2.4I 2.4 L5 GAS
Inlet
- Drain coolant into a suitable container.
- Reposition clamp on heat exchanger feed pipe and remove hose.
- Reposition clamp on cylinder head nipple and remove hose.
- Remove hose from vehicle.
- Reverse procedur...
CLICK HERE TO GET FULL ACCESS TO Volvo V50 RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR Volvo V50 AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported Volvo V50 cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Inner Drive Belt -> Outer Drive Belt
Vehicle: 2007 Volvo V50 2.4I 2.4 L5 GAS
Outer Drive Belt
- Raise and support vehicle.
- Remove right front wheel and tire.
- Remove right fender liner. Remove screws at front edge and fold back fender liner.
- Rotate belt tensioner clockwise as far as it will go, using a suitable tool to relieve tension from drive belt.
- Remove ou...
CLICK HERE TO GET FULL ACCESS TO Volvo V50 SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR Volvo V50 AUTOMOBILES
Component location diagrams for most Volvo V50 cars and light trucks sold in the U.S. from 1990+.
![]() Components on diagram: |
![]() Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO Volvo V50 PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR Volvo V50 AUTOMOBILES
OEM drawn wiring diagrams for most Volvo V50 cars and light trucks sold in the U.S.
![]() Components on diagram: |
![]() Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO Volvo V50 WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR Volvo V50 AUTOMOBILES
OEM TSB listings for most Volvo V50 cars and light trucks sold in the U.S. from 1985+.
Document: AUTO-UP WINDOW OPERATION Vehicle: 2007 Volvo V50 2.4I 2.4 L5 GAS Auto Systems: |
Document: FRONT WHEEL SPEED SENSOR CABLE REPAIR METHOD - REVISED Vehicle: 2006 Volvo V50 T5 2.5 L5 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO Volvo V50 TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR Volvo V50 AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most Volvo V50 cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most Volvo V50 cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most Volvo V50 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most Volvo V50 cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO Volvo V50 SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |