Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Hyundai Excel car and truck
repair procedures including Hyundai engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Hyundai Excel automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Hyundai Excel
- 1991 Hyundai Excel GL 1.5 L4 GAS, CC:1468, Fuel Injection, Engine VIN:, Desg:J
- 1991 Hyundai Excel GLS 1.5 L4 GAS, CC:1468, Fuel Injection, Engine VIN:, Desg:J
- 1991 Hyundai Excel 1.5 L4 GAS, CC:1468, Fuel Injection, Engine VIN:, Desg:J
- 1991 Hyundai Excel L 1.5 L4 GAS, CC:1468, Fuel Injection, Engine VIN:, Desg:J
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Hyundai Excel AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Hyundai Excel cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Hyundai Excel GLS 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing, remove bearing bracket attaching bolts.
- On all models, insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Excel DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Hyundai Excel AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Hyundai Excel cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Hyundai Excel GL 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing, remove bearing bracket attaching bolts.
- On all models, insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Excel DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Hyundai Excel AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Hyundai Excel cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Hyundai Excel 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing, remove bearing bracket attaching bolts.
- On all models, insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Excel DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Hyundai Excel AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Hyundai Excel cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Hyundai Excel L 1.5 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove dust cover, cotter pin and driveshaft nut.
- Drain transmission oil.
- Disconnect lower arm ball joint from knuckle, then remove stabilizer and strut bars from lower arm.
- On models with driveshaft center bearing, remove bearing bracket attaching bolts.
- On all models, insert suitable pry bar between transmission case and driveshaft, then pry driveshaft from transmission. Do not pull on driveshaft and do not insert pry bar deep enough to damage oil seal.
- Using tool No. MB990767, or...
CLICK HERE TO GET FULL ACCESS TO 1991 Hyundai Excel DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Hyundai Excel vehicle.
|
| Access the Complete guide! |
