Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 Chevrolet Corvette car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1992 Chevrolet Corvette automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1992 Chevrolet Corvette
- 1992 Chevrolet Corvette 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:P
- 1992 Chevrolet Corvette ZR-1 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:J
A/C & HEATER SERVICE PROCEDURES FOR 1992 Chevrolet Corvette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1992 Chevrolet Corvette cars and light trucks from 1990+
Cooling Fans -> Passenger Cars Except Saturn -> GRAND AM -> 2.3L (VIN A, D & 3) Engine -> 3.3L Engine -> COMPONENT REPLACEMENT -> Coolant Fan Does Not Turn Off With Engine Cool, A/C Mode Selector Off & Ignition Switch In RUN Position -> Coolant Fan Does Not Turn On -> COOLANT FAN, REPLACE -> DESCRIPTION -> System Check -> System Diagnosis -> SYSTEM DIAGNOSIS & TESTING -> TROUBLESHOOTING
Vehicle: 1992 Chevrolet Corvette 5.7 V8 GAS
DESCRIPTION
The coolant fan is controlled by the coolant fan relay. The coolant fan relay is electrically operated by the ECM. The ECM receives input signals from the coolant temperature sensor, the vehicle speed sensor and the A/C mode selector. The ECM activates the coolant fan relay when the engine coolant, which is sensed by the coolant temperature sensor, is above 227°F, when the A/C is turned on or when the coolant temperature sensor fails. Any of these input signals causes the ECM to ground circuit 535 or 536 when vehicle speed is less than 35 mph. With circuit 535 o...
CLICK HERE TO GET FULL ACCESS TO 1992 Chevrolet Corvette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1992 Chevrolet Corvette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1992 Chevrolet Corvette cars and light trucks from 1990+
Electrical Symbol & Wire Color Code Identification -> Electrical Symbol Identification -> Domestic Vehicles
Vehicle: 1992 Chevrolet Corvette ZR-1 5.7 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1992 Chevrolet Corvette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1992 Chevrolet Corvette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1992 Chevrolet Corvette cars and light trucks from 1990+
Air Bag System Precautions -> General Motors Corp. -> Arming -> Light Trucks & Vans -> Passenger Cars
Vehicle: 1992 Chevrolet Corvette 5.7 V8 GAS
Passenger Cars
Reverse disarming procedures to arm the Supplemental Restraint System, noting the following:
- Ensure all disconnected SRS electrical connectors are securely connected and routed.
- Install all removed fuses in proper locations.
- From a safe position at sides of or below air bag module, Turn ignition switch to ON position and observe Air Bag or SRS warning lamp.
- On all models except Prizm and 1990 Corvette, warning lamp should flash seven to nine times, then go off.
- On Prizm models, warning lamp should light for six seconds,...
CLICK HERE TO GET FULL ACCESS TO 1992 Chevrolet Corvette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1992 Chevrolet Corvette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1992 Chevrolet Corvette cars and light trucks from 1990+
Air Bag System Precautions -> General Motors Corp. -> Arming -> Light Trucks & Vans -> Passenger Cars
Vehicle: 1992 Chevrolet Corvette ZR-1 5.7 V8 GAS
Passenger Cars
Reverse disarming procedures to arm the Supplemental Restraint System, noting the following:
- Ensure all disconnected SRS electrical connectors are securely connected and routed.
- Install all removed fuses in proper locations.
- From a safe position at sides of or below air bag module, Turn ignition switch to ON position and observe Air Bag or SRS warning lamp.
- On all models except Prizm and 1990 Corvette, warning lamp should flash seven to nine times, then go off.
- On Prizm models, warning lamp should light for six seconds,...
CLICK HERE TO GET FULL ACCESS TO 1992 Chevrolet Corvette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1992 Chevrolet Corvette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1992 Chevrolet Corvette cars and light trucks from 1990+
Manual Air Conditioning & Heater System Diagnosis & Testing -> Passenger Cars -> HEATER SYSTEM DIAGNOSIS & TESTING -> ACHIEVA, BERETTA, CAVALIER, CORSICA, GRAND AM, METRO, PRIZM, SKYLARK, STORM & SUNBIRD -> CAMARO & FIREBIRD -> LEMANS -> LUMINA
Vehicle: 1992 Chevrolet Corvette 5.7 V8 GAS
ACHIEVA, BERETTA, CAVALIER, CORSICA, GRAND AM, METRO, PRIZM, SKYLARK, STORM & SUNBIRD
Refer to Fig. , for heater system diagnosis.
LEMANS
...CLICK HERE TO GET FULL ACCESS TO 1992 Chevrolet Corvette A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1992 Chevrolet Corvette AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1992 Chevrolet Corvette cars and light trucks from 1990+
Cooling Fans -> Passenger Cars Except Saturn -> CENTURY -> 2.5L (VIN R) Engine -> 3.3L Engine -> COOLANT FAN DOES NOT TURN OFF WITH ENGINE COOLANT COOL, A/C OFF & IGNITION SWITCH IN RUN -> COOLANT FAN DOES NOT TURN ON -> COOLANT FAN DOES NOT TURN ON WITH A/C ON -> COOLANT FAN DOES NOT TURN ON WITH A/C ON & A/C HEAD PRESSURE ABOVE 200 PSI -> DESCRIPTION -> Less Heavy Duty Cooling -> SYSTEM CHECK -> SYSTEM DIAGNOSIS -> SYSTEM DIAGNOSIS & TESTING -> TROUBLESHOOTING -> With Heavy Duty Cooling
Vehicle: 1992 Chevrolet Corvette ZR-1 5.7 V8 GAS
DESCRIPTION
2.5L (VIN R) Engine
The coolant fan is turned on and off by the ECM, based on inputs from the coolant temperature sensor, vehicle speed sensor and the A/C system. Battery voltage is applied at all times to terminal A of the coolant fan relay and when the ignition switch is turned to the RUN position, voltage is applied to terminal D of the relay. The ECM energizes the coolant fan relay by grounding the dark green/yellow wire circuit (335). The relay energizes and battery voltage is applied to the coolant fan. The ECM opens circuit 335 to de-energize the rela...
CLICK HERE TO GET FULL ACCESS TO 1992 Chevrolet Corvette A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
