Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 Mercury Capri car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1992 Mercury Capri automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1992 Mercury Capri
- 1992 Mercury Capri 1.6 L4 GAS, CC:1598, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:Z
- 1992 Mercury Capri XR2 1.6 L4 GAS, CC:1598, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 Mercury Capri AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1992 Mercury Capri cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1992 Mercury Capri XR2 1.6 L4 GAS
- Raise and support front of vehicle, then remove wheel and tire assembly.
- Remove underbody covers, then remove stabilizer bar link from control arm.
- Using a suitable chisel, raise staked portion of axle nut, then with brakes applied, loosen but do not remove nut.
- Remove clamp bolt attaching lower control arm ball joint to steering knuckle, then pry downward on lower control arm to separate ball joint from steering knuckle.
- On models with manual transaxle, pull outward on steering knuckle and hub assembly to separate halfshaft from differential side gear. Use only enough force ...
CLICK HERE TO GET FULL ACCESS TO 1992 Mercury Capri DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 Mercury Capri AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1992 Mercury Capri cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1992 Mercury Capri 1.6 L4 GAS
- Raise and support front of vehicle, then remove wheel and tire assembly.
- Remove underbody covers, then remove stabilizer bar link from control arm.
- Using a suitable chisel, raise staked portion of axle nut, then with brakes applied, loosen but do not remove nut.
- Remove clamp bolt attaching lower control arm ball joint to steering knuckle, then pry downward on lower control arm to separate ball joint from steering knuckle.
- On models with manual transaxle, pull outward on steering knuckle and hub assembly to separate halfshaft from differential side gear. Use only enough force ...
CLICK HERE TO GET FULL ACCESS TO 1992 Mercury Capri DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1992 Mercury Capri vehicle.
|
| Access the Complete guide! |




