Auto Parts Search
1993 Ford E-150 Econoline CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Ford REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- A/C & Heater Service
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
A/C & HEATER SERVICE PROCEDURES FOR 1993 Ford E-150 Econoline AUTOMOBILES
Module Configuration Procedure -> Ford Motor Company -> 1992-1998
Vehicle: 1993 Ford E-150 Econoline Club Wagon 5.0 V8 GAS
Some modules will require configuration after being installed on the vehicle. All configurable modules will be packaged in a kit which contains a warning label and multi-language sheet which lists requirements to configure the modules.
There are two types of configuration data. The first type is used by the module so that it can interact with the vehicle correctly. The second type is customer preference driven. These are items that the customer may or may not want to have enabled. To program customer driven preferences, a Ford service function card (FSF) and the New G...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1993 Ford E-150 Econoline AUTOMOBILES
Disc Brakes -> Brake Pad Service -> Aerostar, Explorer & Ranger -> Bronco, E-150 & F-150 -> E-250-350 -> F-250-350 & F-Super Duty -> Villager & Windstar
Vehicle: 1993 Ford E-150 Econoline 5.8 V8 GAS
Aerostar, Explorer & Ranger
- Remove caliper as described under "Caliper Service," leaving brake hose connected.
- Secure caliper with wire so that caliper is not hanging with weight on brake hose.
- Compress anti-rattle clip, then remove inner pad from caliper.
- Press each ear of outer pad away from caliper, slide torque buttons out of retention notches and slide pad off caliper.
- Reverse procedure to install, noting the following:
- Use an eight inch C-clamp and a worn inner pad or block of wood to bottom out caliper piston in bore.
- Install new anti-rattle clip on lower end of inner pad.
- Refill...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 1993 Ford E-150 Econoline AUTOMOBILES
Ford Motor Co. Light Trucks, SUVs & Vans -> Fuel Filter Replacement -> Except Diesel Engines & Villager
Vehicle: 1993 Ford E-150 Econoline Club Wagon 5.0 V8 GAS
The fuel system remains under high pressure even when the engine is not running. This residual pressure must be relieved before servicing the fuel system. To avoid injury or fire, release pressure from the fuel system before disconnecting any fuel line.
The fuel system pressure must be relieved prior to disconnecting fuel lines to prevent accidental spray of fuel.
After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven 10 miles or more while it relearns its adaptive strategy.
On model...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Ford E-150 Econoline AUTOMOBILES
DRIVESHAFT, Replace -> One Piece Driveshaft -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 1993 Ford E-150 Econoline 4.9 L6 GAS
One Piece Driveshaft
- Raise and support vehicle.
- To maintain driveline balance, index-mark driveshaft flange yoke and pinion flange.
- Index-mark driveshaft yoke and transmission tailshaft. Do not allow output shaft to turn.
- Remove four bolts.
- Disconnect driveshaft flange yoke from pinion flange, using a suitable tool as shown. Driveshaft flange yoke fits tightly on pinion flange pilot. Never hammer on driveshaft or any of its components to disconnect yoke from flange. Pry only in area shown, with a suitable tool, to disconnect yoke from flange.
- Lower driveshaft and slide it off outp...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Ford E-150 Econoline AUTOMOBILES
Starter, Replace
Vehicle: 1993 Ford E-150 Econoline 4.9 L6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, if required.
- Disconnect electrical connector or solenoid relay wire from starter motor.
- Remove starter motor attach...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline STARTER & ALTERNATOR REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Ford E-150 Econoline AUTOMOBILES
Ford Motor Co. Trucks -> Rear Load Leveling (CHECK SUSP) ->
Vehicle: 1993 Ford E-150 Econoline Club Wagon 4.9 L6 GAS
The CHECK SUSP indicator lights when there is a fault of the rear load ...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1993 Ford E-150 Econoline AUTOMOBILES
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 1993 Ford E-150 Econoline Club Wagon 5.0 V8 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from water pump connection.
- Remove radiator outlet hose from water pump connection and from vehicle.
- Reverse procedure...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1993 Ford E-150 Econoline AUTOMOBILES
Serpentine Drive Belt, Replace -> Automatic Tension -> Manual Tension
Vehicle: 1993 Ford E-150 Econoline Club Wagon 5.0 V8 GAS
Automatic Tension
- Install suitable 5/16 inch closed end wrench on tensioner pulley bolt, then lift tensioner arm away from belt. Do not use socket and ratchet.
- Remove belt, slowly release tensioner. Do not allow tensioner to snap back, as damage may result.
- Reverse procedure to install.
Manual Tension
- Loosen accessory adjustment bolt and pivot bolt.
- Remove belt.
- Reverse procedure to install, adjust belt tension as follows:
- Lo...
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 1993 Ford E-150 Econoline AUTOMOBILES
Component location diagrams for most 1993 Ford E-150 Econoline cars and light trucks sold in the U.S. from 1990+.
I/P Components Diagram for 1993 Ford E-150 Econoline Club Wagon 5.8 V8 GAS Components on diagram: |
Engine Compartment Components Diagram for 1993 Ford E-150 Econoline Club Wagon 5.0 V8 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 1993 Ford E-150 Econoline AUTOMOBILES
OEM drawn wiring diagrams for most 1993 Ford E-150 Econoline cars and light trucks sold in the U.S.
1993 Ford E-150 Econoline 5.8 V8 GAS Wiring Diagram Components on diagram: |
1993 Ford E-150 Econoline 5.8 V8 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 1993 Ford E-150 Econoline AUTOMOBILES
OEM TSB listings for most 1993 Ford E-150 Econoline cars and light trucks sold in the U.S. from 1985+.
Document: RECALL - CERTAIN 1992-2003 MODEL YEAR CARS AND TRUCKS - FUSED JUMPER HARNESS REPLACEMENT FOR VEHICLES SERVICED WITH AN INCOMPATIBLE FUSED JUMPER HARNESS Vehicle: 1993 Ford E-150 Econoline 5.0 V8 GAS Auto Systems: |
Document: SAFETY RECALL - SPEED CONTROL SYSTEM MODIFICATION Vehicle: 1993 Ford E-150 Econoline 5.0 V8 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 1993 Ford E-150 Econoline AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1993 Ford E-150 Econoline cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1993 Ford E-150 Econoline cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1993 Ford E-150 Econoline cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1993 Ford E-150 Econoline cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 1993 Ford E-150 Econoline SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Ford E-150 Econoline vehicle. |
Access the Complete guide! |