Auto Parts Search
We have info for following modifications of 1996 Chrysler Cirrus
- 1996 Chrysler Cirrus LX 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 1996 Chrysler Cirrus LX 2.5 V6 GAS, CC:2497, CID:152, Fuel Injection, Aspiration:152, Engine VIN:, Desg:H
- 1996 Chrysler Cirrus LXI 2.5 V6 GAS, CC:2497, CID:152, Fuel Injection, Aspiration:152, Engine VIN:, Desg:H
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Chrysler Cirrus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Chrysler Cirrus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Chrysler Cirrus LXI 2.5 V6 GAS
- Loosen, but do not remove, stub axle to hub/bearing retaining nut while vehicle is on floor and brakes applied, then raise and support vehicle and remove front wheel and tire assembly.
- Remove brake caliper and support aside, then the brake disc.
- Remove tie rod end attaching nut, then the tie rod end stud from steering knuckle using remover tool No. MB-991113, or equivalent.
- Remove vehicle speed sensor cable routing bracket.
- Remove cotter pin and castle nut from stud of lower ball joint at steering knuckle.
- Turn steering knuckle so front of knuckle is facing as far outboard in ...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler Cirrus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Chrysler Cirrus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Chrysler Cirrus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Chrysler Cirrus LX 2.5 V6 GAS
- Loosen, but do not remove, stub axle to hub/bearing retaining nut while vehicle is on floor and brakes applied, then raise and support vehicle and remove front wheel and tire assembly.
- Remove brake caliper and support aside, then the brake disc.
- Remove tie rod end attaching nut, then the tie rod end stud from steering knuckle using remover tool No. MB-991113, or equivalent.
- Remove vehicle speed sensor cable routing bracket.
- Remove cotter pin and castle nut from stud of lower ball joint at steering knuckle.
- Turn steering knuckle so front of knuckle is facing as far outboard in ...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler Cirrus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Chrysler Cirrus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Chrysler Cirrus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Chrysler Cirrus LX 2.4 L4 GAS
- Loosen, but do not remove, stub axle to hub/bearing retaining nut while vehicle is on floor and brakes applied, then raise and support vehicle and remove front wheel and tire assembly.
- Remove brake caliper and support aside, then the brake disc.
- Remove tie rod end attaching nut, then the tie rod end stud from steering knuckle using remover tool No. MB-991113, or equivalent.
- Remove vehicle speed sensor cable routing bracket.
- Remove cotter pin and castle nut from stud of lower ball joint at steering knuckle.
- Turn steering knuckle so front of knuckle is facing as far outboard in ...
CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler Cirrus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Chrysler Cirrus vehicle. |
Access the Complete guide! |