Auto Parts Search
We have info for following modifications of 1997 Ford Probe
- 1997 Ford Probe GT 2.5 V6 GAS, CC:2450, CID:152, Fuel Injection, Aspiration:152, Engine VIN:, Desg:B
- 1997 Ford Probe 2.0 L4 GAS, CC:1989, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:A
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Ford Probe cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1997 Ford Probe 2.0 L4 GAS
- Disconnect battery ground cable.
- Remove alternator upper mounting bolt.
- Loosen alternator adjusting arm, then remove drive belt.
- Raise and support vehicle, then remove bolts and crossmember.
- Disconnect alternator electrical connec...
CLICK HERE TO GET FULL ACCESS TO 1997 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Ford Probe cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1997 Ford Probe 2.0 L4 GAS
- Disconnect battery ground cable.
- Remove air cleaner assembly, then air cleaner duct.
- Remove upper starter motor retaining bolts.
- Raise and support vehicle, then remove intake manifold support bracket retaining bolts and bracket.
- Disconnect wiring from starter assembly.
- Remove lo...
CLICK HERE TO GET FULL ACCESS TO 1997 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Ford Probe cars and light trucks from 1990+.
Starter, Replace -> Automatic Transaxle -> Manual Transaxle
Vehicle: 1997 Ford Probe GT 2.5 V6 GAS
Manual Transaxle
When servicing starter or performing any maintenance in the area of starter, note heavy gauge input lead connected to starter solenoid is Hot at all times.
- Disconnect battery ground cable, then isolate cable end with electrical tape or equivalent.
- Remove fresh air duct and the air cleaner assembly.
- Disconnect wiring electrical connections from starter motor assembly.
- Remove starter motor retaining bolts, then starter motor from vehicle.
- Reverse procedure to install, noting the following:
- Torque starter motor retaining bolts to 33 ft. lbs.
- Torque starter solenoid B-term...
CLICK HERE TO GET FULL ACCESS TO 1997 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Ford Probe cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1997 Ford Probe GT 2.5 V6 GAS
- Disconnect battery ground cable.
- Disconnect alternator wiring.
- Loosen drive belt tensioner center nut and adjusting bolt, then remove upper alternator mounting bolt.
- Raise and support vehicle.
- Remove right wheel splash guard screws and splash guard.
- Remove drive belt from alternator.
- On models equipped with air conditioning, remove compressor attaching bolts and position compressor, ...
CLICK HERE TO GET FULL ACCESS TO 1997 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 Ford Probe vehicle. |
Access the Complete guide! |