Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Chevrolet Corvette car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Chevrolet Corvette automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Traction Control System (TCS) Warning Lamp ->
Vehicle: 1998 Chevrolet Corvette 5.7 V8 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned on as a bulb check. If the warni...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Anti-Lock Warning Lamp ->
Vehicle: 1998 Chevrolet Corvette 5.7 V8 GAS
This lamp should light when the ignition is turned On. The lamp may light for as long as 30 seconds as a bulb and system inspection. If lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When lamp is lit, turn ignition Off, then restart engine. If l...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Check Engine Or Service Now Soon Engine Indicator Lamps (Gasoline Engines w/Electronic Engine Controls Or EFI) -> Except LeMans, Metro, Prizm, Storm & Vibe
Vehicle: 1998 Chevrolet Corvette 5.7 V8 GAS
The Check Engine lamp should light when the ignition is turned On. When the engine is started, the lamp should go off. If the lamp remains on for 10 seconds or constantly after the engine is started, the self diagnosis system has detected a fault condition and has stored a code in the system Electronic Control Module (ECM) or Powertrain Control Module (PCM). After diagnosis and repair, the ECM memory can be cleared of codes as follows:
On models except Cadillac with DEFI, remove the ECM/PCM fuse or disconnect the battery ground cable for approximately 30...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Low Coolant Lamp ->
Vehicle: 1998 Chevrolet Corvette 5.7 V8 GAS
This lamp should light when engine coolant level in the radiator drops below a predetermined le...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 1997-2004 Corvette -> Relearn -> Reset
Vehicle: 1998 Chevrolet Corvette 5.7 V8 GAS
Reset
If the system detects a tire pressure above 42 psi., the HIGH TIRE PRESSURE message will be displayed on the DIC. If the system detects a tire pressure between 5 and 25 psi., LOW TIRE PRESSURE will be displayed. If a tire pressure below 5 psi. is detected, FLAT TIRE will be displayed followed by two chime sounds and the message MAX. SPEED 55 mph and REDUCED HANDLING. After servicing or inflating tire to recommended pressure, press DIC RESET button to clear DIC warning messages.
Relearn
- Place the ignition in the on position.
- Press the reset button to clear any IPC warning me...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Chevrolet Corvette AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Chevrolet Corvette cars and light trucks sold in the U.S. from 1990+.
General Motors Corp./Saturn Cars -> Air Bag Warning Lamp ->
Vehicle: 1998 Chevrolet Corvette 5.7 V8 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned on as a bulb check. If the air b...
CLICK HERE TO GET FULL ACCESS TO 1998 Chevrolet Corvette MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
