Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Honda Prelude car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Honda Prelude automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Honda Prelude
- 1998 Honda Prelude 2.2 L4 GAS, CC:2156, Fuel Injection
- 1998 Honda Prelude SH 2.2 L4 GAS, CC:2156, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1998 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Prelude cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Inspection -> Installation -> Removal
Vehicle: 1998 Honda Prelude 2.2 L4 GAS
Removal
- Refer to Figs. through when replacing brake shoes.
- Raise and support rear of vehicle, then remove tire and wheel assemblies.
- Loosen parking brake, then remove rear brake drums.
- Remove tension pins by pushing retainer springs while turning.
- Lower brake shoe assembly being careful not to damage wheel cylinder dust cover, then remove lower return spring.
- Disconnect parking brake cable from parking brake lever, then remove brake shoe assembly.
- Remove upper return spring, self-adjuster lever and spring, then separate brake shoes.
- Remove wave washer, parking brake lever and pivot pin ...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Prelude cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1998 Honda Prelude SH 2.2 L4 GAS
Do not mix different brands of brake fluid, as they may not be compatible. Use only DOT 3 or 4 brake fluid.
Ensure brake fluid level in reservoir is at MAX (upper) level line.
- Have an assistant slowly pump brake pedal several times, then hold steady pressure.
- Loosen brake bleed screw to allow air...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> Description -> Accumulator -> Control Unit -> Master Cylinder -> Modulator Unit -> Operation -> Power Unit -> Pressure Switch -> Speed Sensor -> System Components
Vehicle: 1998 Honda Prelude SH 2.2 L4 GAS
Operation
The anti-lock brake system (ABS) modulates the pressure of the brake fluid applied to each caliper. This prevents the wheels from locking, whenever they are likely to be locked due to excessive braking. It then restores normal hydraulic pressure when there is no longer any possibility of wheel locking. The system has a fail safe function that allows normal braking if there is a problem within the system.
[[table data]]System Components
Master Cylinder
A tandem master cylinder is used in order to improve safety of the braking system. In addition, a center valve method is introduced to match ...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Prelude cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> Adjustment
Vehicle: 1998 Honda Prelude SH 2.2 L4 GAS
Adjustment
Refer to...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Prelude cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing -> Check Valve Test -> Function Test -> Leak Test
Vehicle: 1998 Honda Prelude SH 2.2 L4 GAS
Function Test
- With engine turned off, depress brake pedal several times, then depress brake pedal hard and hold for 15 seconds. If brake pedal sinks, then brake line, wheel cylinder, brake caliper or master cylinder is faulty. Repair or replace as necessary.
- Start engine with brake pedal depressed. Pedal should sink slightly. If it does not, the booster or check valve is faulty. Repair or replace as necessary.
Leak Test
- Depress brake pedal with engine running, then stop engine and hold brake pedal for 30 seconds. Pedal height s...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Honda Prelude cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Pushrod Clearance -> Pushrod Length
Vehicle: 1998 Honda Prelude 2.2 L4 GAS
Pushrod Clearance
Master cylinder pushrod-to-piston clearance must be checked and adjusted before installing master cylinder.
- Using pushrod adjustment gauge tool No. 07JAG-SD40100, or equivalent, adjust bolt so top of it is flush with end of master cylinder piston, Fig. .
- Install master cylinder rod seal between pushrod bolt adjustment gauge and brake booster.
- Without disturbing position of adjusting bolts, install gauge upside down on booster and torque nuts to 11 ft. lbs.
- Connect booster in line with a vacuum gauge, and maintain an engine speed that will deliver 20 inches of vacuum. Th...
CLICK HERE TO GET FULL ACCESS TO 1998 Honda Prelude BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
