Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Porsche Boxster car and truck
repair procedures including Porsche engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Porsche Boxster automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1998 Porsche Boxster AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Porsche Boxster cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> 911 -> Master Cylinder
Vehicle: 1998 Porsche Boxster 2.5 H6 GAS
Master Cylinder
911
- Remove operating rod lockpin.
- Remove master cylinder mounting bolt located inside on luggage compartment floor plate.
- Drain brake fluid reservoir ...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche Boxster BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Porsche Boxster AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Porsche Boxster cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> 1998 -> 1999-2000 -> 911
Vehicle: 1998 Porsche Boxster 2.5 H6 GAS
911
1998
- Raise and support vehicle.
- Remove wheels and brake pads.
- Disconnect brake hydraulic line. Using a suitable device, depress and hold brake pedal to restrict flow of brake fluid from reservoir.
- Remove caliper retaining bolts, caliper, and metal shield.
- Loosen bleeder valve and carefully blow hydraulic fluid out of caliper. Recommended air pressure for fluid removal is 14 psi.
- Position caliper in a soft jaw vise, and remove clamping ring and dust boot.
- Depress one caliper piston with tool No. 83, or equivalent, and position a wood block approximately1/3 inches thick between tool a...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche Boxster BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Porsche Boxster AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Porsche Boxster cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> 911 -> Adjustment -> Boxster -> Replace
Vehicle: 1998 Porsche Boxster 2.5 H6 GAS
Adjustment
Boxster
- Raise and support vehicle, then remove rear wheels.
- Release parking brake lever and push rear brake pads back until brake disc rotates freely.
- Open tray behind handbrake lever, then remove rubber inlay and insert.
- Loosen turnbuckle until cables are without pretension.
- Insert screwdriver into threaded wheel bolt hole.
- Rotate parking brake adjustment sprocket until disc cannot be rotated by hand.
- Loosen adjuster by five notches until wheel can be turned, then another four notches.
- Pull parking bake lever up two notches and turn turnbuckle adjusting nut until both w...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche Boxster BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Porsche Boxster AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Porsche Boxster cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> 911 -> Brake Booster, Replace
Vehicle: 1998 Porsche Boxster 2.5 H6 GAS
Brake Booster, Replace
911
- Remove brake booster operating rod lockpin.
- Remove master cylinder attaching bolt from luggage compartment floor plate.
- Drain brake fluid reservoir.
- Disconnect electrical connectors for stop light switch, then the vacuum hose at brake booster and brake lines at master cylinder.
- Remove brake booster brace upper mounting bolt and booster base attaching nuts, then the master cylinder and booster as an assembly. Brace and operating rod do not have to be disconnected at pedal assembly to remove brake booster.
- Reverse procedure to install, noting the foll...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche Boxster BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Porsche Boxster AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Porsche Boxster cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> 911 -> Boxster
Vehicle: 1998 Porsche Boxster 2.5 H6 GAS
Boxster
- Raise and support vehicle. Remove wheels.
- Remove retainer and retainer pin.
- Lift warning contact line and remove warning contacts from plates. Warning contact may be reused if there are no scrape marks on plastic part or line wear.
- Remove some brake fluid from reservoir.
- Set pads as far back as possible with suitable piston reset fixture.
- Use suitable puller to remove pads.
- Reverse procedure to install. Grease rear pad backing plates.
911
- Raise and support vehicle, then remove wheels.
- Remove retainer and retainer pin.
- Lift warning contact line and remove ...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche Boxster BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Porsche Boxster AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Porsche Boxster cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1998 Porsche Boxster 2.5 H6 GAS
Brake fluid is extremely damaging to paint. If fluid should accidentally touch painted surface, immediately wipe fluid from paint and clean painted surface.
- Fill reservoir to rim with brake fluid and remove filter insert.
- Attach pressure bleeder to reservoir and turn On.
- First bleed clutch, then master cylinde...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche Boxster BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1998 Porsche Boxster vehicle.
|
| Access the Complete guide! |
