Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Ford Explorer car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Ford Explorer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Ford Explorer
- 1999 Ford Explorer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:X
- 1999 Ford Explorer 5.0 V8 GAS, CID:302, Fuel Injection, Aspiration:302, Engine VIN:, Desg:P
- 1999 Ford Explorer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
A/C & HEATER SERVICE PROCEDURES FOR 1999 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Ford Explorer cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Heater Core, Replace -> 1998 Auxiliary -> 1998 Standard -> 1999-2000 Auxiliary -> 1999-2000 Standard -> Auxiliary Heater -> Econoline -> Excursion -> Expedition & Navigator -> Explorer & Mountaineer -> F-Series -> Ranger -> Standard Heater -> Villager -> Windstar
Vehicle: 1999 Ford Explorer 4.0 V6 GAS
Econoline
Standard Heater
- Drain engine coolant into suitable container.
- Disconnect quick disconnect heater hose couplings at heater core.
- Plug heater hoses with suitable 5/8 or 3/4 inch plugs.
- Remove engine cover.
- Remove instrument panel finish panel.
- Remove heater core cover and discard heater core case seal.
- Remove heater core using care to avoid spilling coolant.
- Reverse procedure to install.
Auxiliary Heater
- Remove third, fourth and fifth seats as required.
- Remove left center bolste...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Ford Explorer cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Water Pump, Replace -> 1998 -> 1999-2000 -> 2.5L Engine -> 3.0L Engine -> 3.8L Engine -> 4.0L Engine -> 4.0L Pushrod Engine -> 4.0L SOHC Engine -> 4.2L Engine -> 4.6L, 5.4L & 6.8L Engines -> 5.0L Engine -> 7.3L Diesel Engine -> Diesel Engine -> Econoline -> Excursion -> Expedition & Navigator -> Explorer & Mountaineer -> F-Series -> Gasoline Engine -> Ranger -> Villager -> Windstar
Vehicle: 1999 Ford Explorer 5.0 V8 GAS
Econoline
4.2L Engine
- Drain coolant into suitable container.
- Remove fan and fan clutch.
- Remove accessory drive belt.
- Remove lower radiator hose from water pump.
- Disconnect engine harness from water pump mounting stud and water bypass tube.
- Remove A/C compressor support bracket.
- Remove bolts and pulley from water pump.
- Remove bypass tube from water pump.
- Remove bolts (A) and stud bolts (B), Fig. , from water pump, then remove pump from cover.
- Reverse procedure to install, noting the following:
-
...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Ford Explorer cars and light trucks from 1990+
Electric Cooling Fans -> Technical Service Bulletins -> 1998 Contour & Mystique -> 1998 Escort & Tracer -> Cooling Fan Does Not Turn Off After Shutdown -> Cooling Fan Stays On After Vehicle Is Shut Off
Vehicle: 1999 Ford Explorer 5.0 V8 GAS
Cooling Fan Does Not Turn Off After Shutdown
1998 Escort & Tracer
A no restart may occur after a short drive in cold weather, or the cooling fan may not turn off with key out of ignition. These concerns may be due to water or ice accumulation in the Integrated Relay Control Module. Replace ICRM with...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Ford Explorer cars and light trucks from 1990+
Automatic Temperature Control Systems Diagnosis & Testing -> Technical Service Bulletins -> Poor Or No A/C Cooling On Passenger Or Driver Vent -> Action -> Issue -> LS
Vehicle: 1999 Ford Explorer 4.0 V6 GAS
LS
Issue
This may be caused by debris trapped in the coolant valve and/or the DA...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Ford Explorer cars and light trucks from 1990+
Computer Relearn Procedures -> Ford Motor Co. -> 1999-2002 -> 2003-04 -> Automatic Data Transfer -> Except 1999-2002 -> Manual Data Entry -> Powertrain Control Module (PCM)
Vehicle: 1999 Ford Explorer 4.0 V6 GAS
Powertrain Control Module (PCM)
Except 1999-2002
Disconnect negative battery cable for a minimum of five minutes. After clearing memory, it is required to drive vehicle a minimum of 10 miles to allow PCM time to relearn operating strategy.
1999-2002
Automatic Data Transfer
- Prior to removing old PCM, connect a suitably programmed scan tool to Data Link Connector (DLC).
- Follow scan tool manufacturers' instructions to download data from old PCM.
- Install new PCM and connect scan tool to DLC.
- Follow scan tool manufactur...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Explorer A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1999 Ford Explorer AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1999 Ford Explorer cars and light trucks from 1990+
General Service Domestic Vehicles -> 1998-2000 -> Leak Test -> Electronic Leak Detectors -> Fluid Leak Detectors
Vehicle: 1999 Ford Explorer 5.0 V8 GAS
Testing the refrigerant system for leaks is one of the most important phases of troubleshooting. One or more of the methods outlined will prove useful in detecting leaks or checking connections if service work is performed. Before beginning any leak test, attach a manifold gauge set and note pressure. If little or no pressure is indicated, a partial charge must be installed. Check all connections, compressor head gasket, oil filler plug and compressor shaft seal for leaks.
For R-134a system an electronic type leak detector is recommended.
Electronic Leak Detectors
...CLICK HERE TO GET FULL ACCESS TO 1999 Ford Explorer A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
