Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 MERCEDES-BENZ E320 car and truck
repair procedures including MERCEDES-BENZ engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 MERCEDES-BENZ E320 automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 MERCEDES-BENZ E320 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 MERCEDES-BENZ E320 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2004 MERCEDES-BENZ E320 3.2 V6 GAS
Front
- Raise and support vehicle.
- Remove righthand sensor, downstream of TWC.
- Match mark front propeller shaft relative to flange of front axle gear and to flange of transfer case.
- Detach front propeller shaft from flange of front axle gear.
- Detach front propeller shaft from flange of transfer case.
- Remove propeller shaft from front axle gear.
- Reverse procedure to install, noting the following:
- Torque flexible coupling to transfer case (M10) 108 in. lbs. (M12) 13 ft. lbs.
- Torque flexible coupling to front axle gear to (M10) 108 in. lbs. (M12) 13 ft. lbs.
Rear
- Raise and support vehicle.
- R...
CLICK HERE TO GET FULL ACCESS TO 2004 MERCEDES-BENZ E320 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 MERCEDES-BENZ E320 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 MERCEDES-BENZ E320 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Intermediate -> Rear
Vehicle: 2004 MERCEDES-BENZ E320 3.2 V6 GAS
Front
- Raise and support vehicle.
- Remove front wheels.
- Unscrew hexagon collar bolt on front axle shaft.
- Detach lower engine compartment paneling.
- Press supporting joint out of steering knuckle.
- Press tie rod joint out of steering knuckle.
- Move steering knuckle out of supporting joint.
- Turn back of steering knuckle outwards and then pull outwards, while moving front axle shaft out of front axle shaft flange. Do not damage boots of front axle shaft and of supporting joint. If required, to loosen front axle shaft screw in hexagon-collar bolt again a few threads and drive out front ax...
CLICK HERE TO GET FULL ACCESS TO 2004 MERCEDES-BENZ E320 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



