Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Chevrolet Corvette car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Chevrolet Corvette automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Chevrolet Corvette
- 2008 Chevrolet Corvette 6.2 V8 GAS, CID:376, Fuel Injection, Aspiration:376, Engine VIN:, Desg:W
- 2008 Chevrolet Corvette Z06 7.0 V8 GAS, CC:7011, CID:427, Fuel Injection, Aspiration:427, Engine VIN:, Desg:E
- 2008 Chevrolet Corvette 427 Limited Edition Z06 7.0 V8 GAS, CC:7011, CID:427, Fuel Injection, Aspiration:427, Engine VIN:, Desg:E
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2008 Chevrolet Corvette 6.2 V8 GAS
- Place the ignition switch in the Accy position.
- Using the a suitably programmed scan tool, initiate the TPMS Learn Mode. A horn chirp sounds indicating the learn mode has been actuated.
- Starting with the left front tire, hold the antenna of the GM tool No. J-46079 or equivalent, near the valve stem on the wheel, then press and release the activate button and wait for the horn to chirp.
- When the horn chirp has sounded, the sensor information is learned, then t...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2008 Chevrolet Corvette Z06 7.0 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2008 Chevrolet Corvette Z06 7.0 V8 GAS
- Place the ignition switch in the Accy position.
- Using the a suitably programmed scan tool, initiate the TPMS Learn Mode. A horn chirp sounds indicating the learn mode has been actuated.
- Starting with the left front tire, hold the antenna of the GM tool No. J-46079 or equivalent, near the valve stem on the wheel, then press and release the activate button and wait for the horn to chirp.
- When the horn chirp has sounded, the sensor information is learned, then t...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2008 Chevrolet Corvette 6.2 V8 GAS
The Low Tire Pressure warning lamp and/or the DIC (Driver Information Center) Low Tire Pressure message can be cl...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic System Check -> Diagnostic Tests -> DTC C0750 Left Front Low Tire Pressure Sensor, C0755 Right Front Low Tire Pressure Sensor, C0760 Left Rear Low Tire Pressure Sensor Or C0765 Right Rear Low Tire Pressure Sensor -> Intermittent & Poor Connections -> Intermittents -> Low Tire Pressure Indicator Fault -> Poor Connections
Vehicle: 2008 Chevrolet Corvette 427 Limited Edition Z06 7.0 V8 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector) and follow manufacturer's instructions.
Diagnostic Tests
Diagnostic System Check
- Before performing diagnostic procedures, proceed as follows:
- Ensure that the battery is fully charged and the cable connections are clean and tight.
- Check fuse panel for blown fuses.
- Ensure ground connections are clean and tight.
- Inspect system component for wear and damage.
- Ensure system electrical connector connections are clean and tight.
- Inspect for aftermarket devices that could effect TPMS operati...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2008 Chevrolet Corvette Z06 7.0 V8 GAS
Refer to Figs. through for w...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
