Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Ford Explorer car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Ford Explorer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Ford Explorer
- 2008 Ford Explorer XLT 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2008 Ford Explorer XLT 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:8
- 2008 Ford Explorer Limited 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2008 Ford Explorer Limited 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:8
- 2008 Ford Explorer Eddie Bauer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2008 Ford Explorer Eddie Bauer 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:8
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford Explorer AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford Explorer cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2008 Ford Explorer Eddie Bauer 4.0 V6 GAS
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the latest tire pressure information.
- Place the ignition switch in the On position.
- Position Ford TPMS activation tool, or equivalent, against the LF tire side wall 180° from the valve stem.
- The TPMS activation tool will flash a green light and sound a beep for each successful response from a TPMS sensor.
- Press the TPMS activat...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Explorer TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford Explorer AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford Explorer cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2008 Ford Explorer Eddie Bauer 4.6 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Explorer TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford Explorer AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford Explorer cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> TPMS Sensor Activation -> TPMS Sensor Training
Vehicle: 2008 Ford Explorer Limited 4.6 V8 GAS
TPMS Sensor Activation
To conserve battery power, the TPMS sensors will go into a sleep mode after approximately 30 minutes of inactivity. The sensors will not transmit tire pressure information while in sleep mode. The sensors must be activated to transmit the latest tire pressure information.
- Place the ignition switch in the On position.
- Position Ford TPMS activation tool, or equivalent, against the LF tire side wall 180° from the valve stem.
- The TPMS activation tool will flash a green light and sound a beep for each successful response from a TPMS sensor.
- Press the TPMS activat...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Explorer TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford Explorer AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford Explorer cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS Sensor -> TPMS Sensor Strap & Cradle
Vehicle: 2008 Ford Explorer Limited 4.0 V6 GAS
TPMS Sensor
Removal
Tire pressure sensors are manufactured in multiple colors based on their application. When installing a new sensor, make sure the color of the sensor being installed matches the color of the sensor that was removed. The different colored sensors are not interchangeable, Fig. .
- Loosen the wheel and tire assembly lug nuts.
- Raise and support the vehicle with jack stands.
- Remove the wheel and tire assembly.
- Position the wheel and tire assembly on a suitable tire changing machine as follows:
- On a paddle type tire machine, position the valve step at 12 o'clock or 6 ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Explorer TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford Explorer AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford Explorer cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS Sensor -> TPMS Sensor Strap & Cradle
Vehicle: 2008 Ford Explorer XLT 4.0 V6 GAS
TPMS Sensor
Removal
Tire pressure sensors are manufactured in multiple colors based on their application. When installing a new sensor, make sure the color of the sensor being installed matches the color of the sensor that was removed. The different colored sensors are not interchangeable, Fig. .
- Loosen the wheel and tire assembly lug nuts.
- Raise and support the vehicle with jack stands.
- Remove the wheel and tire assembly.
- Position the wheel and tire assembly on a suitable tire changing machine as follows:
- On a paddle type tire machine, position the valve step at 12 o'clock or 6 ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Explorer TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Ford Explorer AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Ford Explorer cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> TPMS Sensor -> TPMS Sensor Strap & Cradle
Vehicle: 2008 Ford Explorer Limited 4.6 V8 GAS
TPMS Sensor
Removal
Tire pressure sensors are manufactured in multiple colors based on their application. When installing a new sensor, make sure the color of the sensor being installed matches the color of the sensor that was removed. The different colored sensors are not interchangeable, Fig. .
- Loosen the wheel and tire assembly lug nuts.
- Raise and support the vehicle with jack stands.
- Remove the wheel and tire assembly.
- Position the wheel and tire assembly on a suitable tire changing machine as follows:
- On a paddle type tire machine, position the valve step at 12 o'clock or 6 ...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Explorer TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Ford Explorer vehicle.
|
| Access the Complete guide! |
