Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Lincoln MKX car and truck
repair procedures including Lincoln engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Lincoln MKX automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2008 Lincoln MKX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Lincoln MKX cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> E-250 w/Tension Limiter -> E-450 & E-550 -> E-Super Duty -> Expedition, Explorer, F-Super Duty, Mountaineer & Navigator -> Freestar & Monterey -> Parking Brake -> Rear Disc
Vehicle: 2008 Lincoln MKX 3.5 V6 GAS
Parking Brake
Expedition, Explorer, F-Super Duty, Mountaineer & Navigator
Rear Disc
- Remove rear disc brake rotor as outlined in .
- Measure inside diameter of parking brake drum using brake adjustment gauge tool No. D81L-1103-A, or equivalent, Fig. .
- Adjust parking brake shoe to .020 inch (.508 mm) less than drum measurement, Fig. .
- Reverse procedure to install.
E-Super Duty
E-250 w/Tension Limiter
- Loosen tension limiter nut to end of tension limiter threads.
- Depress brake pedal to last detent position (17 clicks).
- Measure and record exposed length of cinch strap, Fig. .
- Tighten tension limiter n...
CLICK HERE TO GET FULL ACCESS TO 2008 Lincoln MKX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Lincoln MKX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Lincoln MKX cars and light trucks from 1990+.
Anti-Lock Brakes -> Edge & MKX -> Description
Vehicle: 2008 Lincoln MKX 3.5 V6 GAS
The anti-lock brake system (ABS) module, with or without stability assist, simultaneously manages the anti-lock braking, traction control and engine control systems to maintain vehicle control during deceleration and acceleration. The ABS accomplishes this by communicating with the other modules over the high speed controller area network (HS-CAN) bus.
When the ignition switch is in the RUN position, the module carries out a preliminary electrical check and, at approximately 20 km/h (12 mph), the hydraulic pump motor is turned on for approximately one half-second. Any malfunction of...
CLICK HERE TO GET FULL ACCESS TO 2008 Lincoln MKX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Lincoln MKX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Lincoln MKX cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Bendix Hydro-Boost Brake Booster -> Bendix Hydro-Max Brake Booster -> Combination Valve -> Height Sensing Proportioning Valve -> Hydraulic Control Unit (HCU) -> Hydraulic Control Valves -> Integral Bypass Proportioning Valve -> Master Cylinder
Vehicle: 2008 Lincoln MKX 3.5 V6 GAS
Master Cylinder
The master cylinder consists primarily of a hydraulic cylinder, primary and secondary hydraulic pistons and a single or dual chamber fluid reservoir. The front brakes are connected to the primary outlet port(s) and are actuated by the primary piston assembly. The rear brakes are connected to the secondary outlet port and are actuated by the secondary piston assembly.
Hydraulic Control Valves
Combination Valve
This multi-function hydraulic control unit consists primarily of a pressure differential valve, brake lamp warning switch and a proportioning valve. A pressure diff...
CLICK HERE TO GET FULL ACCESS TO 2008 Lincoln MKX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Lincoln MKX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Lincoln MKX cars and light trucks from 1990+.
Anti-Lock Brakes -> Edge & MKX -> Precautions -> Brake Fluid Handling
Vehicle: 2008 Lincoln MKX 3.5 V6 GAS
Brake Fluid Handling
Brake fluid can cause serious injury and vehicle damage if not handled properly. Avoid ...
CLICK HERE TO GET FULL ACCESS TO 2008 Lincoln MKX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Lincoln MKX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Lincoln MKX cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Anti-Lock Brake System Hydraulic Control Unit -> Anti-Lock Brakes -> Bench -> Caliper -> E-Series, F-150 & Mark LT -> Edge, Escape, Mariner & MKX -> Expedition & Navigator -> Explorer & Mountaineer -> Explorer Sport/Sport Trac, Freestar, F-Super Duty, Monterey, Motorhome & Ranger -> Four Wheel Anti-Lock Brake System -> Gravity Bleed -> In Vehicle -> Manual -> Manual Bleed -> Master Cylinder -> Pressure -> Pressure Bleed
Vehicle: 2008 Lincoln MKX 3.5 V6 GAS
Explorer & Mountaineer
Master Cylinder
- Connect one end of a clear flexible hose to master cylinder bleeder screw. Submerge other end in a container partially filled with suitable brake fluid.
- Have an assistant pump and then hold firm pressure on brake pedal.
- Open master cylinder bleeder screw until brake fluid flows into container.
- When fluid stops flowing, close bleeder screw.
- Repeat procedure until there are no air bubbles in fluid.
- Have an assistant pump and then hold firm pressure on brake pedal.
- Loosen a master cylinder tube fitting at anti-lock brake hydraulic control unit.
- When...
CLICK HERE TO GET FULL ACCESS TO 2008 Lincoln MKX BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Lincoln MKX AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Lincoln MKX cars and light trucks from 1990+.
Power Brake Units -> Bendix Vacuum Brake Booster -> Description
Vehicle: 2008 Lincoln MKX 3.5 V6 GAS
The single and tandem vacuum boosters, Figs. and , are self contained vacuum hydraulic power braking units. These are vacuum suspended units that use vacuum and atmospheric pressure for their power.
On models equipped with gasoline engines, vacuum is supplied through a fitting in the intake manifold. On models equipped with diesel engines, vacuum is supplied through a vacuum pump.
The three basic elements of the booster are the vacuum power chamber, mechanically actua...
CLICK HERE TO GET FULL ACCESS TO 2008 Lincoln MKX BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
