Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Mercury Sable car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Mercury Sable automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Mercury Sable
- 2008 Mercury Sable 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:W
- 2008 Mercury Sable Premier 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:W
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Sable AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Sable cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake Disc Service
Vehicle: 2008 Mercury Sable Premier 3.5 V6 GAS
Disc brake service is critical because of the close tolerances required in machining the brake disc to ensure proper brake operation.
Maintaining close control of the shape of the rubbing surfaces is required to prevent brake roughness. In addition, the surface finish must be non-directional and maintained at a micro-inch finish. This is required to avoid pulls and erratic performance, and to promote long lining life and equal lining wear of both the lefthand and righthand brakes.
Do not attempt to refinish the rubbin...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Sable BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Sable AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Sable cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Precautions -> System Depressurizing
Vehicle: 2008 Mercury Sable Premier 3.5 V6 GAS
System Depressurizing
On models equipped with anti-lock brakes, hydraulic system must be depressurized prior to ...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Sable BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Sable AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Sable cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> Assemble -> Cobra -> Crown Victoria, Fusion, Grand Marquis, Milan, MKZ, MKS, Sable, Taurus, Taurus X & Town Car -> Disassemble -> Except Cobra -> Focus -> Inspection -> Mustang -> Overhaul -> Replacement
Vehicle: 2008 Mercury Sable 3.5 V6 GAS
Replacement
On models with anti-lock brakes, the brake booster system must be depressurized before disconnecting any hydraulic lines or fittings. Depressurize the system by pumping the brake pedal at least 25 times with the ignition in the Off position.
Crown Victoria, Fusion, Grand Marquis, Milan, MKZ, MKS, Sable, Taurus, Taurus X & Town Car
Before removing calipers, mark lefthand and righthand calipers so they can be installed in their original position.
- On models equipped with air suspension, turn air suspension service switch to Off position.
- On all models, raise and support fron...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Sable BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Sable AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Sable cars and light trucks from 1990+.
Anti-Lock Brakes -> MKS, Sable, Taurus & Taurus X -> System Service -> ABS Control Module -> AWD -> Brake System Bleed -> Component Replacement -> Front Wheel Speed Sensor -> FWD -> Hydraulic Control Unit (HCU) -> Manual -> Module Configuration -> Pressure -> Rear Wheel Speed Sensor
Vehicle: 2008 Mercury Sable 3.5 V6 GAS
Brake System Bleed
Manual
The primary and secondary (front and rear) hydraulic brake systems are individual systems and are bled separately. Bleed longest tube first on individual system being serviced. During complete bleeding operation, Do not allow the master cylinder reservoir to run dry. Never reuse brake fluid that has been drained from hydraulic system or has been allowed to stand in an open container for an extended period of time.
- To bleed brake system, position a suitable box wrench on bleeder fitting on brake wheel cylinder. Attach rubber drain hose to bleeder fitting.
- Sub...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Sable BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Sable AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Sable cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake Pad Service -> Cobra -> Crown Victoria, Fusion, Grand Marquis, Milan, MKZ, MKS, Sable, Taurus, Taurus X & Town Car -> Except Cobra -> Focus -> Inspection -> Installation -> Mustang -> Removal
Vehicle: 2008 Mercury Sable 3.5 V6 GAS
On models with anti-lock brakes, the brake hydraulic system must be depressurized before disconnecting any hydraulic lines or fittings. Depressurize the system by pumping the brake pedal at least 25 times with the ignition in the Off position.
Crown Victoria, Fusion, Grand Marquis, Milan, MKZ, MKS, Sable, Taurus, Taurus X & Town Car
Removal
- Remove brake fluid until reservoir is half full.
- On models equipped with air suspension, turn air suspension service switch to Off position.
- On all models, raise and support front of vehicle, then remove tire and wheel assembly.
- Remove two calipe...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Sable BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Sable AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Sable cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Rotor Replace -> Installation -> Removal
Vehicle: 2008 Mercury Sable 3.5 V6 GAS
This procedure has been revised by a Technical Service Bulletin.
On Sable, Taurus and Taurus X models,the disc rotor is a hat section-type of composite steel and cast iron. A Rotunda Rotor Mounting Adapter tool No. 054-00032, or equivalent, is required for use on the brake lathe for refinishing. Failure to use the adapter will result in gouging the brake disc, making it unfit for use.
On Sable, Taurus and Taurus X models,if service is required, install the new full cast front disc rotors, part No. F10Y-1125-B, in pairs only. Never install a full cast rotor on one side of the vehicle...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Sable BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
