Auto Parts Search
We have info for following modifications of 2008 Mitsubishi Lancer
- 2008 Mitsubishi Lancer Evolution MR 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:V
- 2008 Mitsubishi Lancer ES 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:U
- 2008 Mitsubishi Lancer GTS 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:U
- 2008 Mitsubishi Lancer DE 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:U
- 2008 Mitsubishi Lancer Evolution GSR 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:V
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Lancer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Lancer cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2008-09 Lancer & Lancer Evolution -> Relearn -> Reset -> Tire Pressure Sensor ID Registration -> Warning Lamp
Vehicle: 2008 Mitsubishi Lancer ES 2.0 L4 GAS
Reset
Tire Pressure Sensor ID Registration
- Connect a suitable scan tool to vehicle data link connector, Fig. .
- Follow scan tool instructions to enter "Tire Pressure Sensor ID Registration" mode.
- Select the number of tires that you want to register.
- Starting at any TPMS transmitter, emit a signal from the transmitter as follows:
- Decrease the tire pressure to 25.2 psi or less by changing 2.9 psi or more, and register the TPMS transmitter ID code of each wheel to TPMS receiver
- Verify that a signal has been received by the TPMS rec...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Lancer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Lancer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Lancer cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 2008 Mitsubishi Lancer GTS 2.0 L4 GAS
This lamp will be illuminated when the automatic transmission fluid temperature is excessive. When...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Lancer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Lancer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Lancer cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Active Skid Control System (ACS) Warning Lamp ->
Vehicle: 2008 Mitsubishi Lancer DE 2.0 L4 GAS
The ACS warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The lamp will flash when the ASC is activated. If the...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Lancer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Lancer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Lancer cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Maintenance/Service Reminder -> 2007-09 Lancer
Vehicle: 2008 Mitsubishi Lancer ES 2.0 L4 GAS
- Place the ignition switch in the off position.
- Lightly press the info switch to display the service reminder screen, Fig. .
- Press and hold the info switch for at least 2 seconds to display the...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Lancer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Lancer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Lancer cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Air Bag Warning Lamp -> Except 2006-09 Raider
Vehicle: 2008 Mitsubishi Lancer Evolution GSR 2.0 L4 GAS
The diagnosis unit monitors the Supplemental Restraint System (SRS) and stores data concerning any faults detected in the system. When the ignition key is in the On or Start positions, the lamp should illuminate for approximately 7 seconds, then turn off. This indicates the system is operating proper...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Lancer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mitsubishi Lancer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Mitsubishi Lancer cars and light trucks sold in the U.S. from 1990+.
Mitsubishi -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2008-09 Lancer & Lancer Evolution -> Relearn -> Reset -> Tire Pressure Sensor ID Registration -> Warning Lamp
Vehicle: 2008 Mitsubishi Lancer Evolution GSR 2.0 L4 GAS
Reset
Tire Pressure Sensor ID Registration
- Connect a suitable scan tool to vehicle data link connector, Fig. .
- Follow scan tool instructions to enter "Tire Pressure Sensor ID Registration" mode.
- Select the number of tires that you want to register.
- Starting at any TPMS transmitter, emit a signal from the transmitter as follows:
- Decrease the tire pressure to 25.2 psi or less by changing 2.9 psi or more, and register the TPMS transmitter ID code of each wheel to TPMS receiver
- Verify that a signal has been received by the TPMS rec...
CLICK HERE TO GET FULL ACCESS TO 2008 Mitsubishi Lancer MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Mitsubishi Lancer vehicle. |
Access the Complete guide! |