Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Chevrolet Aveo car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Chevrolet Aveo automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Chevrolet Aveo
- 2009 Chevrolet Aveo LT 1.6 L4 GAS, CC:1598, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:E
- 2009 Chevrolet Aveo LS 1.6 L4 GAS, CC:1598, CID:98, Fuel Injection, Aspiration:98, Engine VIN:, Desg:E
BRAKE SERVICE PROCEDURES FOR 2009 Chevrolet Aveo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Chevrolet Aveo cars and light trucks from 1990+.
Anti-Lock Brakes -> Teves MK-25E -> Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Electronic Brake Control Module (EBCM) Connector Pin Identification -> Intermittent Fault Conditions
Vehicle: 2009 Chevrolet Aveo LT 1.6 L4 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to the Data Link Connector (DLC), and follow manufacturer's instructions.
Diagnostic Trouble Code Interpretation
Refer to the "Diagnostic Tests" for DTC identification and description.
Electronic Brake Control Module (EBCM) Connector Pin Identification
Refer to Figs. and for EBCM connector pin identification.
Diagnostic Tests
[[table data]]Clearing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instruction.
Intermittent Fault Conditions
Intermittent fau...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Aveo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Chevrolet Aveo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Chevrolet Aveo cars and light trucks from 1990+.
Drum Brakes -> Aveo -> Precautions
Vehicle: 2009 Chevrolet Aveo LT 1.6 L4 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations the amount of asbestos dust from brake lining wear is at a low level because of a chemical breakdown during use and a few precautions will minimize exposure.
- Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent excessive asbestos exposure.
- Wear suitable respirator approved for asbestos dust use during repair procedure...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Aveo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Chevrolet Aveo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Chevrolet Aveo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake -> Precautions
Vehicle: 2009 Chevrolet Aveo LS 1.6 L4 GAS
- Keep grease and other foreign material off brake linings, caliper, surfaces of disc and external surfaces of hub.
- Avoid deforming disc, and nicking or scratching brake linings.
- Worn or damaged rubber piston seals should be replaced.
- During removal and installation of a wheel assembly, ensure not to interfere with or damage caliper splash shield, or bleeder screw.
- Front wheel bearing pre...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Aveo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Chevrolet Aveo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Chevrolet Aveo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake -> Description
Vehicle: 2009 Chevrolet Aveo LT 1.6 L4 GAS
The caliper has a single piston and is mounted to the support bracket by two mounting bolts, Figs. and . The caliper assembly slides on the two mounting bolts. Upon brake application, fluid pressure against the piston forces the inboard sho...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Aveo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Chevrolet Aveo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Chevrolet Aveo cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake System Flush
Vehicle: 2009 Chevrolet Aveo LS 1.6 L4 GAS
If brake fluid is old, rusty or contaminated or whenever new components are installed in hydraulic system, the system must be flushed. Bleed brakes...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Aveo BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2009 Chevrolet Aveo AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2009 Chevrolet Aveo cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake -> Caliper Service -> Assemble -> Disassemble -> Inspection -> Replacement
Vehicle: 2009 Chevrolet Aveo LS 1.6 L4 GAS
Replacement
- Remove approximately 2/3 of brake fluid from master cylinder.
- Raise and support front of vehicle, then remove wheel and tire assembly.
- Push piston back into caliper bore using suitable C-clamp, Fig. .
- Remove inlet fitting mounting bolt, copper washer and inlet fitting from caliper housing. Plug opening in inlet fitting. Do not crimp brake hose.
- Remove caliper mounting bolts and caliper, Fig. . If there are signs of corrosion, replace bolts when installing caliper assembly.
- Reverse procedure to install.
Disassemble
- Clean outside of caliper, then drain brake fluid from caliper...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Aveo BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
