Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Chevrolet Corvette car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Chevrolet Corvette automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Chevrolet Corvette
- 2009 Chevrolet Corvette 6.2 V8 GAS, CID:376, Fuel Injection, Aspiration:376, Engine VIN:, Desg:W
- 2009 Chevrolet Corvette Z06 7.0 V8 GAS, CC:7011, CID:427, Fuel Injection, Aspiration:427, Engine VIN:, Desg:E
- 2009 Chevrolet Corvette ZR1 6.2 V8 GAS, CID:376, Fuel Injection, Aspiration:376, Engine VIN:, Desg:R
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Keyless Entry Transmitter Or DIC Method
Vehicle: 2009 Chevrolet Corvette Z06 7.0 V8 GAS
Keyless Entry Transmitter Or DIC Method
- Place the ignition switch in the Accy position.
- Using the a suitably programmed scan tool, initiate the TPMS Learn Mode. A horn chirp sounds indicating the learn mode has been actuated.
- Starting with the left front tire, hold the antenna of the GM tool No. J-46079 or equivalent, near the valve stem on the wheel, then press and release the activate button and wait for the horn to chirp.
- When the horn chirp has sounded, the sensor informatio...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2009 Chevrolet Corvette 6.2 V8 GAS
Tire Pressure Indicator Sensor
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over ...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2009 Chevrolet Corvette ZR1 6.2 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2009 Chevrolet Corvette Z06 7.0 V8 GAS
Tire Pressure Indicator Sensor
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over ...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2009 Chevrolet Corvette Z06 7.0 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2009 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic System Check -> Diagnostic Tests -> DTC C0569 System Configuration Error -> DTC C0750 Left Front Low Tire Pressure Sensor, C0755 Right Front Low Tire Pressure Sensor, C0760 Left Rear Low Tire Pressure Sensor Or C0765 Right Rear Low Tire Pressure Sensor -> DTC C0775 Low Tire Pressure System Sensors Not Learned -> Intermittent & Poor Connections -> Intermittents -> Low Tire Pressure Indicator Fault -> Poor Connections
Vehicle: 2009 Chevrolet Corvette ZR1 6.2 V8 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector) and follow manufacturer's instructions.
Diagnostic Tests
Low tire pressure in one or more tires is indicated by a continuously illuminated TPMS indicator after the bulb check is completed. The DIC will display a check tire pressure type message, if equipped. It is not necessary to perform the Relearn procedure for a low tire condition.
When a TPMS DTC is set, the TPMS indicator will flash for one minute after the bulb check is completed and then will remain illuminated. The DI...
CLICK HERE TO GET FULL ACCESS TO 2009 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
