Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Mercury Milan car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Mercury Milan automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Mercury Milan
- 2009 Mercury Milan Premier 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2009 Mercury Milan Premier 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
- 2009 Mercury Milan 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2009 Mercury Milan 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Mercury Milan AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Mercury Milan cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Mercury Milan 3.0 V6 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Milan DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Mercury Milan AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Mercury Milan cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Mercury Milan 2.3 L4 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Milan DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Mercury Milan AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Mercury Milan cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Mercury Milan Premier 3.0 V6 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Milan DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Mercury Milan AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Mercury Milan cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Mercury Milan Premier 2.3 L4 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Milan DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Mercury Milan vehicle.
|
| Access the Complete guide! |
